Hondata

I have a Hondata S300 v3 in my civic, it stopped starting. If I connect the USB to the PC it starts up, when I disconnect it it turns off. The fuses are all good. How can the problem be? Thank you

Hi. Every time the Smanager program starts, the window settings are reset and it is cumbersome to rearrange the windows and change the measurement and temperature units. What is the reason for this? before it did not happen, it has been in the last update

Nobody knows? Not even if the coils of k20 or k24 would serve?

1- http://napolperformance.com/2001-2002-2003-2004-2005-ignition-coil-packs-honda-civic-si-ex-dx-acura-el-1-7l.html 2- http://napolperformance.com/honda-ignition-coils-wires-s2k-crv-accord-civic-acura-dc5-rsx-2-0-2-2-2-4-vtec.html 3- http://napolperformance.com/4-performance-ignition-coils-for-2006-...

Thank you for your attention. Good service

I was not a store seller I was a person who bought it and I did not get to use it

Already solved. I just had to disable two injector errors and Baro

A US seller sent me to Spain

The Ecu works. The pc detects it. I can upload calibrations. I have both green LEDs on. But the smanager does not read sensors. The engine starts, the car moves. But it does not exceed 2500rpm and goes off in idle.

No not yet. The mount a week ago

I dont understand that question. I live in Cadiz, Spain

I have uploaded the calibration with this version on two different PCs. I can not do datalog because it does not read the sensors. Even if it starts, it's strange

Serial number Hondata: 39248
Serial number ECU: 37820-p28-g02
Hardware: version 3
Firmware: version 8
Software: version 2.5.5

The red light blinks only when the PC is connected. Now I have the problem of protection mode

Is not activated. The light only blinks when I connect the pc, I suppose that's why. My problem now is that it does not rise from 2500rpm and in idle it goes off