Search found 64 matches

by creizlein
Wed Jun 12, 2019 5:12 pm
Forum: s300 / SManager
Topic: Min/Max Long Term default settings incorrect?
Replies: 2
Views: 499

Re: Min/Max Long Term default settings incorrect?

Glad it helped! Thanks for the quick fix.
by creizlein
Fri Jun 07, 2019 10:31 am
Forum: s300 / SManager
Topic: Min/Max Long Term default settings incorrect?
Replies: 2
Views: 499

Min/Max Long Term default settings incorrect?

I always wondered why the default values (on all basemaps) for Min/Max adjustment for Long term are switched over? Or I am misunderstanding something? snap1076.png For the short trim ones (second pair) they seem to be correct, the min is a smaller value than the max But for the long term trim, for m...
by creizlein
Tue Apr 02, 2019 11:09 am
Forum: s300 / SManager
Topic: Closed Loop Malfunction
Replies: 13
Views: 1944

Re: Closed Loop Malfunction

I second portenio78 reports, for me it happens randomly once at week or even less, I am sure i dont even notice it from time to time, the few times i noticed is when cruising steady and then i read my lambda at 14.9 or 14.8 then i know the CL went off, and a turn-off/on will bring it back to life. i...
by creizlein
Tue Apr 02, 2019 10:40 am
Forum: s300 / SManager
Topic: SManager vew version not opening
Replies: 13
Views: 1933

Re: SManager vew version not opening

I did not have any issues here, running Win7 sp1 64bit

Nice and Glad to see updates on sManager, the Datalog Tab addition to Graphs is a nice and useful one, please keep it up, software is everything and the features to be added are endless!!!
by creizlein
Mon Feb 18, 2019 7:11 am
Forum: s300 / SManager
Topic: S300 Datalogging Issues
Replies: 7
Views: 709

Re: S300 Datalogging Issues

What else do you expect? There is no magic ball here where Spunkster can guess what is wrong with all your wires and sensors, and you clearly state that the ECU works fine in another car, so it has to be something else related. I would suggest you to see if you can test the same behaviour with anoth...
by creizlein
Sun Dec 23, 2018 11:58 am
Forum: s300 / SManager
Topic: SManager software requests
Replies: 308
Views: 108059

Re: SManager software requests

Got this working actually. I built an Excel VBA tool that streams the data into a .csv in real time, you can analyze it post-run and or live trail the file in MegaLogViewer HD for more useful analysis. Once I get a few more of the initial bugs worked out, I'll post the thing on GIthub. That would b...
by creizlein
Thu Nov 29, 2018 1:32 pm
Forum: s300 / SManager
Topic: SManager software requests
Replies: 308
Views: 108059

Re: SManager software requests

I make tools to help me manipulate maps in Excel so this functionality would help me greatly. I do the same and I ended up using Hypersnap Text-Snap functionality, which basically snaps text on screen and copy it to text, there are several 3rd party tools that allow you to do it, its not the best o...
by creizlein
Wed Oct 10, 2018 10:14 am
Forum: s300 / SManager
Topic: Hondata permanently as a live display
Replies: 1
Views: 303

Re: Hondata permanently as a live display

I do, but just when needed, honestly I ran it for few weeks and found its bit useless for daily so got bored of even turning on the tablet and connect the app, its usefull only when you need to actually check/change something. ... thats my experience
by creizlein
Wed Oct 10, 2018 10:12 am
Forum: s300 / SManager
Topic: Wideband Sensor s300
Replies: 2
Views: 469

Re: Wideband Sensor s300

AEM kit includes more than just the sensor, you need at least a controller that sends 0-5v signal to the ECU as Spunkster said.
by creizlein
Fri Sep 14, 2018 12:05 pm
Forum: S300 Calibrations
Topic: B16a2 stalls when rpms are dropping
Replies: 3
Views: 1219

Re: B16a2 stalls when rpms are dropping

Check what Spunkster recommended, idle speed with car fully warm and unplug the IACV, the car should idle at around 700rpm or even less, but not stall, i believe that is the sweet spot when the IACV is unplugged, pretty much the car has to almost stall but not, then plug IACV back and if it works co...
by creizlein
Fri Sep 14, 2018 12:02 pm
Forum: s300 / SManager
Topic: Tuning for better fuel economy
Replies: 2
Views: 356

Re: Tuning for better fuel economy

the calibration is a file archive as any other archive in your machine, you have to be able to find the actual archive using your explorer, make sure the archive has .skl extension as well (do not confuse your archive with a link to your actual archive, that might give you issues). But if you need h...
by creizlein
Fri Sep 14, 2018 11:56 am
Forum: s300 / SManager
Topic: Smooth fuel table or consistent AFR?
Replies: 6
Views: 694

Re: Smooth fuel table or consistent AFR?

or post the 2d/3d graphs shown in the fuel table to see how much smoothness we talking about. But in my limited experience, I understand what you said, and I ended up using the first approach, consistent AFR as opposed as 100% smooth graphs, still, the jump from one point to another is not major and...
by creizlein
Thu Aug 30, 2018 11:57 am
Forum: s300 / SManager
Topic: SManager software requests
Replies: 308
Views: 108059

Re: SManager software requests

Sorry, it was something added in a long time ago but never made visible. I'll change this for the next release. on release 2.6.7, although it was not documented, CL Boolean value was added and it works like a charm, its really easy now to see when CL is on or not, thank you a lot for remembering an...
by creizlein
Mon Jul 16, 2018 3:25 pm
Forum: s300 / SManager
Topic: What tablet
Replies: 4
Views: 1299

Re: What tablet

You can get any table that runs Windows 10 Pro, you have to ensure its the Pro version which is the only one that can run Win32 apps without problem. (I heard the Home might do, but honestly i havent tried, surely Windows 10 mobile will DO NOT run it) One cheap example of those is the NuVision 8-inc...
by creizlein
Wed Jul 11, 2018 9:24 am
Forum: SManager Display Templates
Topic: unlocking a display template
Replies: 4
Views: 5291

Re: unlocking a display template

Make sure you right click on a empty area of the window, not over a control, otherwise it wont work.
Its easier if you maximize the window and target right-click on a corner.