Search found 78 matches
- Thu Jul 04, 2013 6:05 pm
- Forum: s300 / SManager
- Topic: AF display not going below 12 or above 19
- Replies: 6
- Views: 8083
Re: AF display not going below 12 or above 19
i opened the case and the resistors are in place.. how do you recommend removing them from the ecu?
- Mon Jul 01, 2013 5:10 pm
- Forum: s300 / SManager
- Topic: AF display not going below 12 or above 19
- Replies: 6
- Views: 8083
Re: AF display not going below 12 or above 19
the wideband is the PLX m-300 and is wired into the ecu via the D10 input
- Thu Jun 27, 2013 10:20 pm
- Forum: s300 / SManager
- Topic: AF display not going below 12 or above 19
- Replies: 6
- Views: 8083
AF display not going below 12 or above 19
Hello,
while datalogging my s300 display will not read below 12 or above 19 for AF.
My wideband will go to as low as 10 before showing rich and 20 before showing lean...
The wideband is accurate but the display will not show the higher or lower numbers...
any ideas on this?
while datalogging my s300 display will not read below 12 or above 19 for AF.
My wideband will go to as low as 10 before showing rich and 20 before showing lean...
The wideband is accurate but the display will not show the higher or lower numbers...
any ideas on this?
- Wed Mar 30, 2011 10:33 am
- Forum: s300 / SManager
- Topic: Full Throttle Shift
- Replies: 1
- Views: 1872
its pretty easy to understand and set, record your shifting for say 1/2 2/3 3/4, find the rpm you normally end at, say shift at 8k and it drops to 6500k then set your full throttle shift rpm at 6700k and give it a shot. you can lower or raise it as needed for your shift patterns and preference. dont...
- Tue Mar 29, 2011 11:30 am
- Forum: s300 / SManager
- Topic: does the s300 bypass anything over a stock ecu by default?
- Replies: 2
- Views: 1704
- Tue Mar 29, 2011 10:27 am
- Forum: s300 / SManager
- Topic: does the s300 bypass anything over a stock ecu by default?
- Replies: 2
- Views: 1704
does the s300 bypass anything over a stock ecu by default?
Im trying to fix a car i picked up, 99 hatch with a h22 swapped in it. the car has high impedance injectors, obd1 and will only run on my other cars s300. it will not run on a p13 that came with it. my car has a h22 as well with dsm 450cc and a resistor box. the p13 and my s300 both run my car just ...
- Mon Feb 21, 2011 6:48 pm
- Forum: s300 / SManager
- Topic: pcs/vtec issue, vtec does not engage
- Replies: 7
- Views: 3312
- Mon Feb 21, 2011 6:40 pm
- Forum: s300 / SManager
- Topic: pcs/vtec issue, vtec does not engage
- Replies: 7
- Views: 3312
- Mon Feb 21, 2011 5:27 pm
- Forum: s300 / SManager
- Topic: pcs/vtec issue, vtec does not engage
- Replies: 7
- Views: 3312
- Mon Feb 21, 2011 5:21 pm
- Forum: s300 / SManager
- Topic: pcs/vtec issue, vtec does not engage
- Replies: 7
- Views: 3312
1997 Accord F20B DOHC Vtec 450cc dsm injectors PR4 ecu i believe, its a non vtec ecu locash ob2 to obd1 conversion harness pcs used to control relay to activate vtec pcs no longer turns off which in turn activates vtec. datalog one showing car working with pcs turning off activating vtec. one showin...
- Sat Feb 19, 2011 3:58 pm
- Forum: s300 / SManager
- Topic: pcs/vtec issue, vtec does not engage
- Replies: 7
- Views: 3312
pcs/vtec issue, vtec does not engage
Hello all, Driving the car for 8 months using the pcs output with a relay to engage VTEC. after runing the car for 20 minutes vtec just stopped working. cleaned and inspected all the wiring, relay and solenoid and everything is fine. hooked up my laptop and datalogged driving and the pcs indicator d...
- Tue Dec 14, 2010 5:22 pm
- Forum: s300 / SManager
- Topic: help making my wideband work with eld
- Replies: 7
- Views: 3382
- Tue Dec 14, 2010 4:58 pm
- Forum: s300 / SManager
- Topic: help making my wideband work with eld
- Replies: 7
- Views: 3382
- Tue Dec 14, 2010 1:29 pm
- Forum: s300 / SManager
- Topic: help making my wideband work with eld
- Replies: 7
- Views: 3382
- Fri Dec 10, 2010 8:51 pm
- Forum: s300 / SManager
- Topic: help making my wideband work with eld
- Replies: 7
- Views: 3382
help making my wideband work with eld
Ok, heres how it is. plx wideband hooked up, wired up to the eld wire and all works well with the wideband. I have smanager to use eld input for wideband but no matter i change, alter etc my display will not show the af ratio. the graph does nothing either. the only thing that does anything is the e...