Hondata

any good news about new release?

thank you for information.

When new release should be available? Ofcourse approximate date.

Thanks

Hello. Hard to find any information about it, becouse not many poeples using it. We don`t know why Seq shift cut not isn`t work. ECU PRA from Euro CTR . We used all input for test (E16,E22,E29), and nothing. In logs input signal arrived to ECU (E22BKSW) from the switch installed on Seq tramission, b...

you cannot use Kpro.
also you cannot use other ecu like PRA,PRB,etc,

becouse Accord ecu control many internal function, like climatronics,etc,

so if you change ecu, you lost these function.

propably accord 2.4 has rbb ecu and 4 plugs... so you can try connect rsx ecu, but for sure you lost most function in car, like climatronic,etc,etc.

I used over 5 differents calibration from RSX, and run very nice... (dyno power testing, not road testing) ofcourse needs tuning... so if you are tuning very well, it is doesn`t matter with which calibration you are starts, stock Euro CTR or RSX .. starts from euro ctr ctock is little safely, becous...

you can use calibration from rsx s
K20A2 with K2 cams, header, exhaust, CAI

but if you have good tuner, you can start tuning from stock calibration....

thanks
but why KING.... selling P06 to vtec conversion, how do it?
http://www.kingmotorsports.com/product. ... le=Integra

What should I do if I want use P06 ecu in vtec engine B16A2?

I should do somethink inside ecu, or only install S100 with enabled vtec option?

thanks

sorry, I forgot

read CEL code in honda service, then you will know what exactly going on.

if you have toda campulleys, you have locked VTC system.

toda campulleys are always killer vtc, it is designed for spec. B and C cams.
http://www.todaracing.com/products/hond ... lleys.html

mayby you should disabled in vtec option point VTC (Ivtec)

if this fuction is enabled and you using toda vtc killer campulleys propably check engine light will be on.

Kpro boost controller works in EUro Kpro?

and example valve selonoid from avcr could use with kpro?

my today dyno, boost 1.7bar, still on normal 98 RON

resoults 657HP and 719Nm

http://domgol.fm.interia.pl/DYNO.JPG