Search found 61 matches

by dc5itr01
Sat Dec 11, 2021 3:30 pm
Forum: K-Pro / KManager
Topic: fuel pump prime issue and no ecu download
Replies: 31
Views: 5117

Re: fuel pump prime issue and no ecu download

Problem diagnosed. Your updated software came with a virus. Confirmed this on another ecu also. Laptops both went crazy. Did all the same bad things. Had to wipe the laptops and ecu clean. Reloaded newer version. All good. Couldnt use old tune file also. It became corrupted with your virus. Had to s...
by dc5itr01
Thu Dec 09, 2021 12:45 pm
Forum: K-Pro / KManager
Topic: fuel pump prime issue and no ecu download
Replies: 31
Views: 5117

Re: fuel pump prime issue and no ecu download

Have you looked at the info sent via software?
by dc5itr01
Thu Dec 02, 2021 10:59 am
Forum: K-Pro / KManager
Topic: fuel pump prime issue and no ecu download
Replies: 31
Views: 5117

Re: fuel pump prime issue and no ecu download

Please go a read the errors that was sent to hondata directly from software. There was a few that was sent while issues happend, like coms loss.
by dc5itr01
Thu Dec 02, 2021 10:51 am
Forum: K-Pro / KManager
Topic: fuel pump prime issue and no ecu download
Replies: 31
Views: 5117

Re: fuel pump prime issue and no ecu download

The cranking problem was a previous issue that was not often.
Issues now are far more common as mentioned above posts.
Please read them.
I'm waiting for a kpro from another car to test in a few days. Then well know if it's the ecu.
by dc5itr01
Thu Dec 02, 2021 9:31 am
Forum: K-Pro / KManager
Topic: fuel pump prime issue and no ecu download
Replies: 31
Views: 5117

Re: fuel pump prime issue and no ecu download

13.8 volts across pin A2 and A5 while engine runs. Regardless of the coms issue being there or not.
by dc5itr01
Mon Nov 29, 2021 12:59 pm
Forum: K-Pro / KManager
Topic: fuel pump prime issue and no ecu download
Replies: 31
Views: 5117

Re: fuel pump prime issue and no ecu download

Ok will check tomorrow.
by dc5itr01
Mon Nov 29, 2021 12:41 pm
Forum: K-Pro / KManager
Topic: fuel pump prime issue and no ecu download
Replies: 31
Views: 5117

Re: fuel pump prime issue and no ecu download

On what pins should I check?
by dc5itr01
Mon Nov 29, 2021 10:42 am
Forum: K-Pro / KManager
Topic: fuel pump prime issue and no ecu download
Replies: 31
Views: 5117

Re: fuel pump prime issue and no ecu download

I sent the info via the online help, but also attached.
2002 ITR k24 boosted
Prc kpro4 done by hondata.
Updated firmware becuase I have ethonal wired in. Not activated yet though.
ECU worked briefly in other vehicle, as does often in mine.
But there was also the coms problem, WHICH CANNOT BE LOGGED.
by dc5itr01
Sat Nov 27, 2021 9:49 am
Forum: K-Pro / KManager
Topic: fuel pump prime issue and no ecu download
Replies: 31
Views: 5117

Re: fuel pump prime issue and no ecu download

I am constantly loosing coms with ecu. Manager is repeatedly re establishing connection , every few seconds. For a while green led was on and red flashed. Now green is on and no red at all. Yet this was while I did have coms with k manager. This is not supposed to happen like that. Airfuel is stuck ...
by dc5itr01
Sat Nov 27, 2021 8:38 am
Forum: K-Pro / KManager
Topic: fuel pump prime issue and no ecu download
Replies: 31
Views: 5117

Re: fuel pump prime issue and no ecu download

I tested the ecu in a different car. It immediately gave a P0600 error
Serial communication link malfunction.
What does this mean?
by dc5itr01
Thu Nov 25, 2021 9:05 pm
Forum: K-Pro / KManager
Topic: fuel pump prime issue and no ecu download
Replies: 31
Views: 5117

Re: fuel pump prime issue and no ecu download

It's been a few years living with these gremlins. But now things have gotten worse. I used to have a random issue of trying to start the car and immediately the engine light would stay on while cranking and after fire up.. It would start up, but misfire. I would then cycle ignition and restart, and ...
by dc5itr01
Fri Jul 23, 2021 10:34 am
Forum: K-Pro / KManager
Topic: Tapping into rpm
Replies: 4
Views: 610

Re: Tapping into rpm

I can confirm it does have 0-5v and 5-0v sensing.
by dc5itr01
Thu Jul 22, 2021 11:11 pm
Forum: K-Pro / KManager
Topic: Tapping into rpm
Replies: 4
Views: 610

Re: Tapping into rpm

Ok let me explain then, Fitted a dual clutch gearbox that required a DBW throttle. I have a standalone DBW throttle controller. The DBW has built in tps. This tps signal I wanna send to kpro. Therefore cannot use original kpro sensor ground and 5v sensor live from kpro. Just the dbw tps I wanna send...
by dc5itr01
Thu Jul 22, 2021 12:21 pm
Forum: K-Pro / KManager
Topic: Tapping into rpm
Replies: 4
Views: 610

Tapping into rpm

Hi, can I tap into crank sensor signal wire to feed rpm to another device that requires rpm input? Should I use a 100ohm resistor? Is it crucial to use the sensor ground and 5v sensor output for the tos sensor? I would like to not use it for various reasons. I will be feeding these 2 wires from anot...
by dc5itr01
Tue Jun 22, 2021 9:54 am
Forum: K-Pro / KManager
Topic: Canbus output to 3 devices
Replies: 4
Views: 563

Re: Canbus output to 3 devices

You that guy, thanks.
I wish you plenty