Hondata

97 Acura Integra B20v Type r intake 1000cc injectors Mild port job on intake side 1mm bigger valves intake and exhaut 70\68 trim turbo 2.5 intake piping 2.5 exhaust piping Ram horn turbo mani Hondata s300 v3 34430 Bought @Central Florida Turbo P75 ecu Question: What happen to the values in smanager?...

forgot this

also forgot to ask just to make sure, I have been using the hybrid racing euc pinout for my wiring. to be sure that this is a good source of info, could you tell me which pins are the map pins on the A connector (A11, A19, A21).

Wish I could change the title. so I came across another issue. My map values don't change with revs or engine load. i tried it with 2 different map sensors(stock map and aftermarket), went and re-wired the map sensor by its self to make sure it was wired right and still no changes. in the datalog i ...

Is anyone running these injectors or have ran them. How well did they work? Where you able to get a clean idle afr? Was you able to cruise in a parking lot with out it bucking? Just looking for a general review of them from first hand experience. Right now i have some 1000cc injectors and thier good...

First I like to say hope this isnt an no no to keep bringing up this thread for my questions, but since all my info about my ecu and car has been put on it, i think it easier like this so no info will be lost. QUESTION Is there a way to set up some type of rpm switch thru the kpro that will allow me...

Also for got to ask i bought a prosport wideband it says it has a 0-5v output for analog. Which why should i splice it to on the kpro the one that says +invert or - ? Sorry can't give better labling but not near car or lap top

Ok solved the code issue it was the 2 big connectors that are grey and black and split the harness from the bay. Now I have another ???? I want to hook up the fan control thru the ecu. Is there a diagram that you can refer me to that will allow the fan to be controlled by the ecu. This is due to the...

Just wanting to know if there was any android app that is able to connect via USB for datalogging. Really just want to watch over some sensors that is read in the ecu like coolant temp, iat, map, and a few other ones. For some strange reason my radio won't link to the kpro v4 Bluetooth. It recognize...

Can do. Just need a couple days to find the perfect candidate. But if I can't you think its OK to run it like that I do need to finish up checking leaks and cooling system efficiency.

01 BMW 325Ci sn# 53572 software ver. 4.4.3.0 37820-PPA-A58 (my ecu recognizes it as a PRB ecu) kmanager 4.4.3.0 k miata intake, 1000cc injectors, b series tps, 4 bar map sensor, 74mm throttle body, b series iat, and its rwd (as if I needed to say that) jdm express Japan in Orlando Fl May 5th 2020 Af...

Problem solved go ahead and dead this thread thank for any info that was given.

Thank you for the replies. I was refering to the data logger app from SDash Development. I have a video of it working. Im also showing 3 pics of what i have, in hopes that it will help mebpaint a better picutre of my idea/question. Capture+_2019-03-05-05-58-19.png 20190305_072627.jpg 20190305_072655...

Ok so i have the s300 v3 computer and was looking into getting the SDash app. Ill be using either a spare phone or a tablet. I'm wanting to perma install the android device into my dash, so I need to setup a charging system for it.I found all the cords to do it but i was woundering if I use a usb sp...

Hi
I was wondering if there was a way to see the playback run time for the data logging. I'm trying to chase down a stutter/stumble problem.
S300 v3
CPR kit
Blaster multi spark coils
B20v w/ gsr head
Thank for the help.