Search found 12 matches

by elmago
Wed Mar 23, 2016 8:54 pm
Forum: K-Pro Calibrations
Topic: K24, GT35R, 1300cc injectors
Replies: 5
Views: 2845

Re: K24, GT35R, 1300cc injectors

would you care to post a datalog of a third or fourth gear pull?
by elmago
Tue Mar 22, 2016 8:29 pm
Forum: s300 / SManager
Topic: High IGN advance
Replies: 7
Views: 3541

Re: High IGN advance

The reason i didn't recommend playing with the tip parameters is because usually what causes spikes like that when you blip the throttle is a mechanical issue not so much the software. In my opinion you don't really need to make any changes to those parameters if you are running a oem style ignition...
by elmago
Tue Mar 22, 2016 4:49 pm
Forum: s300 / SManager
Topic: High IGN advance
Replies: 7
Views: 3541

Re: High IGN advance

Check your distributer's internal components. I personally had an engine that had a fried wire to the igniter and it caused a spike of over 80* advance. To say the least that engine is no longer with us. That would be the first area to look at, try switching over to a different kne and see if it hel...
by elmago
Tue Mar 22, 2016 4:39 pm
Forum: FlashPro Manager
Topic: 56 Calibrations?
Replies: 4
Views: 1899

Re: 56 Calibrations?

You don't need to buy a custom calibration just to start the car. Any of those will suffice. Now to get it running 100% then i would recommend a custom tune.
by elmago
Tue Mar 22, 2016 1:50 pm
Forum: s300 / SManager
Topic: High IGN advance
Replies: 7
Views: 3541

Re: High IGN advance

I do not think it's a software problem. Has it always done this or did it just start? Also a spike that large at that low of an rpm (or any rpm for that matter) will cause cylinder pressure to rise and cause knock.
by elmago
Tue Mar 22, 2016 8:12 am
Forum: FlashPro Calibrations
Topic: Need a basemap for Jackson Racing supercharger
Replies: 7
Views: 3677

Re: Need a basemap for Jackson Racing supercharger

are you just trying o get the car running? i have a few maps for supercharged 8th gens.
by elmago
Tue Mar 22, 2016 8:05 am
Forum: S300 Calibrations
Topic: Turbo b18c 450cc injectors
Replies: 1
Views: 1583

Re: Turbo b18c 450cc injectors

here's a basemap to get you running. i do not recommend using it for anything but driving it to get tuned, but it should be safe enough under normal driving conditions.
by elmago
Tue Mar 22, 2016 7:49 am
Forum: s300 / SManager
Topic: High IGN advance
Replies: 7
Views: 3541

Re: High IGN advance

would you be able to post the log from where the picture was taken from? i went over your calibration and race log everything looks like it should. maybe seeing the actual log on my end ill be able to give you a hand.
by elmago
Tue Mar 22, 2016 7:26 am
Forum: FlashPro Manager
Topic: 56 Calibrations?
Replies: 4
Views: 1899

Re: 56 Calibrations?

Those are the most refined maps that hondata puts out for us. If you want all the basemaps, go to show all filters and then check the box that says race calibration and they should all pop up. The map based calibrations are not really refined throughout updates. The first ones you see are maf based ...
by elmago
Tue Mar 15, 2016 6:42 pm
Forum: Civic Si 2006-2011 Americas
Topic: skunk2 stage 2 cam startup calibration.
Replies: 5
Views: 2575

Re: skunk2 stage 2 cam startup calibration.

Thats why i asked if the stock was used. The cam angle map in that particular kal provided in the software has the vtc advanced up to 45* which realistically is all the cam rotates. On the skunk2 website they recommend up to 40* for max power. So if the basemap is based off a stock block then in my ...
by elmago
Tue Mar 15, 2016 1:03 pm
Forum: Civic Si 2006-2011 Americas
Topic: skunk2 stage 2 cam startup calibration.
Replies: 5
Views: 2575

Re: skunk2 stage 2 cam startup calibration.

Thanks for the response, yes i will be watching my a/f ratios. I just wanted to be certain about the cam angles, don't want any valve/piston contact.
by elmago
Mon Mar 14, 2016 10:15 pm
Forum: Civic Si 2006-2011 Americas
Topic: skunk2 stage 2 cam startup calibration.
Replies: 5
Views: 2575

skunk2 stage 2 cam startup calibration.

hello, I recently installed a set of skunk2 stage 2 tuner cams on my 08 si and i was wondering if the startup basemap that is provided in the flashpro is based off the stock block (stock pistons)? I saw that it runs 45* cam angle and wanted to be certain that it is safe to run the basemap for the ti...