Search found 18 matches
- Tue Feb 05, 2019 3:41 pm
- Forum: Applications
- Topic: 1999 civic VTI ( Si ) E.U. + S300 + OBD2 adapter
- Replies: 1
- Views: 2268
1999 civic VTI ( Si ) E.U. + S300 + OBD2 adapter
Hi, I buy an adapter for 3 pins ( connector OEM in E.U., not OBD2 standard plug ) to OBD2 plug. And i try to connect it a OBD2 adapter bluetooth and this don't connect with the ECU ( S300 ? ) I yet to use the app for my smartphone and it's turn on good ! But i would to put a little display with cabl...
- Mon Aug 28, 2017 2:04 pm
- Forum: s300 / SManager
- Topic: S300 / ecu P06 modified ...
- Replies: 3
- Views: 1969
Re: S300 / ecu P06 modified ...
I come back a little late ...
Therefore in fact it is the caliper that puts the voltage regulator to the ground of the chassis for its cooling. He was not present on the ECU I had bought!
Therefore in fact it is the caliper that puts the voltage regulator to the ground of the chassis for its cooling. He was not present on the ECU I had bought!
- Mon Aug 28, 2017 10:42 am
- Forum: s300 / SManager
- Topic: S300 V3 closed loop disabled after a time ...
- Replies: 3
- Views: 1175
Re: S300 V3 closed loop disabled after a time ...
the calibration ...
- Mon Aug 28, 2017 10:39 am
- Forum: s300 / SManager
- Topic: S300 V3 closed loop disabled after a time ...
- Replies: 3
- Views: 1175
- Sun Aug 27, 2017 3:38 pm
- Forum: s300 / SManager
- Topic: S300 V3 closed loop disabled after a time ...
- Replies: 3
- Views: 1175
S300 V3 closed loop disabled after a time ...
hi, On my EK4 with B18C6, the ecu is a modified P06 to P28. Last days i have my lambda was not stable and go to 0.68 by time and i see the closed loop diasbled after a time of running. i supposed that the the regulator ( AEM ) has any problem. i remove it and i see the screw with seatr is worn and i...
- Tue Jul 19, 2016 3:46 pm
- Forum: s300 / SManager
- Topic: S300 / ecu P06 modified ...
- Replies: 3
- Views: 1969
Re: S300 / ecu P06 modified ...
It could be an issue with the ignition switch, or with the ECU, but the way you describe it, it sounds like it could just be the switch. We do sell a kit for replacing all the capacitors inside the ECU as well: https://www.hondata.com/products/accessories/capacitor-kit i have yet a new big capacito...
- Mon Jul 18, 2016 1:58 pm
- Forum: s300 / SManager
- Topic: S300 / ecu P06 modified ...
- Replies: 3
- Views: 1969
S300 / ecu P06 modified ...
Hi, i have a S300 in a ecu P06 modified to accept a S300 and i buy the ecu like that, and i buy a new S300. strangely when it's hot, the ignition key cut quickly or are happening missed ignition i must to cut the ignition key and restart ignition key and its' good until next time. i check my harness...
- Sat Apr 30, 2016 3:49 am
- Forum: s300 / SManager
- Topic: KnockSensor
- Replies: 2
- Views: 1835
Re: KnockSensor
So it s possible with a knock sensor analyser with 0-5v analog output?
- Wed Feb 24, 2016 2:02 am
- Forum: s300 / SManager
- Topic: advanced protection problem...
- Replies: 14
- Views: 3847
Re: advanced protection problem...
Did you trim these datalogs? No it's 2 datalogs differents at 5 minutes intervals . Must I do re install USB drivers? May be ... ?! edit : bizzarly, i must to remove a soft on my laptop and i don't see the Hondata s300 in the list of the soft installed ! so i re install Smanager ... i see tomorrow ...
- Tue Feb 23, 2016 1:17 pm
- Forum: s300 / SManager
- Topic: advanced protection problem...
- Replies: 14
- Views: 3847
Re: advanced protection problem...
Did you trim these datalogs? No it's 2 datalogs differents at 5 minutes intervals . Must I do re install USB drivers? May be ... ?! edit : bizzarly, i must to remove a soft on my laptop and i don't see the Hondata s300 in the list of the soft installed ! so i re install Smanager ... i see tomorrow ...
- Tue Feb 23, 2016 12:29 pm
- Forum: s300 / SManager
- Topic: advanced protection problem...
- Replies: 14
- Views: 3847
Re: advanced protection problem...
According to the datalog you have posted, it looks like the display for the EGT is reading a neg value at all times. we are agree for that ! i post 2 news little datalog and video corresponding : ( EGT on display is analog1 ) - data logiciel 230216 : datalog 230216.s3d https://youtu.be/OOmXhcfBXS0 ...
- Tue Feb 23, 2016 5:46 am
- Forum: s300 / SManager
- Topic: advanced protection problem...
- Replies: 14
- Views: 3847
Re: advanced protection problem...
The voltage of my EGT is good because in the display of the S300 the values displayed are good and the same of the EGT display !Spunkster wrote:Have you checked the voltage that your EGT is outputting?
If in my EGT display the value is approx. 600°C, on the display of S300 is 600°C +-10 ....
- Mon Feb 22, 2016 3:42 pm
- Forum: s300 / SManager
- Topic: advanced protection problem...
- Replies: 14
- Views: 3847
Re: advanced protection problem...
ok i tried to setting new start and end points...Spunkster wrote:Either make smaller datalogs, or you can trim them in the graph windows by right clicking and setting new start and end points.
- Sat Feb 20, 2016 11:53 am
- Forum: s300 / SManager
- Topic: advanced protection problem...
- Replies: 14
- Views: 3847
Re: advanced protection problem...
i try to do a dataloging and i can see more problems... Indeed, there are values that do not correspond to those displayed in the display mode! for my analog input 1 ( EGT ) in the display mode i see the values of the AEM EGT ( 600 - 750°C ) but in the dataloging values they are between -130 / -140°...
- Fri Feb 19, 2016 3:15 pm
- Forum: s300 / SManager
- Topic: advanced protection problem...
- Replies: 14
- Views: 3847
Re: advanced protection problem...
ok i try to do this in the next days .Spunkster wrote:You have not supplied a datalog showing the issue.