Search found 45 matches
- Fri Dec 16, 2016 5:44 am
- Forum: FlashPro Manager
- Topic: FlashPro Requests
- Replies: 367
- Views: 499327
Re: FlashPro Requests
2009-2014 tsx cu2 The ability to lock the VTC angle between shifts. Read the help... Deceleration VTC Angle The default behaviour of the ECU is to return to cam to 0 degrees when the throttle is released (during deceleration or decel fuel cut), except in the 2012 Civic Si which will return the cam ...
- Thu Dec 15, 2016 1:46 pm
- Forum: TSX 2004-2014
- Topic: injector recovery help
- Replies: 15
- Views: 8796
Re: injector recovery help
I can be very patient, in fact I have been (along with others) patient, but when something goes ignored for months, i get to be a tad impatient.
We are customers that bought into this product, we don't expect changes over night, but we won't tolerate being ignored.
We are customers that bought into this product, we don't expect changes over night, but we won't tolerate being ignored.
- Thu Dec 15, 2016 12:15 pm
- Forum: FlashPro Manager
- Topic: FlashPro Requests
- Replies: 367
- Views: 499327
Re: FlashPro Requests
2009-2014 tsx cu2
The ability to lock the VTC angle between shifts.
The ability to lock the VTC angle between shifts.
- Thu Dec 15, 2016 12:04 pm
- Forum: TSX 2004-2014
- Topic: injector recovery help
- Replies: 15
- Views: 8796
Re: injector recovery help
Saw a new version of flashpro manager come out yesterday and still the cam lock feature has been added for us. No responce either to this thread. Been waiting since august.
It's obvious at this point that the 2009-2014 tsx flashpro owners are being ignored.
-Thanks hondata.
It's obvious at this point that the 2009-2014 tsx flashpro owners are being ignored.
-Thanks hondata.
- Wed Dec 07, 2016 7:33 pm
- Forum: TSX 2004-2014
- Topic: injector recovery help
- Replies: 15
- Views: 8796
Re: injector recovery help
Hondata, I need this option added. Driving my tsx with the cam going to 0 between shifts is unacceptable. Ive been driving the car like this for over a year and its still very annoying as ever. Is there any possible chance that this option will be added soon?
- Sun Dec 04, 2016 4:21 pm
- Forum: s300 / SManager
- Topic: Possible To Tune Fuel Overrun/Map For Exhaust Crackle?
- Replies: 11
- Views: 31506
Re: Possible To Tune Fuel Overrun/Map For Exhaust Crackle?
Are you still driving around like this? Just curious.
- Thu Oct 27, 2016 1:29 pm
- Forum: TSX 2004-2014
- Topic: Full throttle Shifting for TSX
- Replies: 31
- Views: 44505
Re: Full throttle Shifting for TSX
I believe that story. I had that same exact conversation with my 3 year old.
We all now wear neck braces.
We all now wear neck braces.
- Tue Oct 18, 2016 3:04 pm
- Forum: FlashPro Manager
- Topic: Overrun Injector Settings
- Replies: 13
- Views: 8331
Re: Overrun Injector Settings
Thanks. I'll try these settings.
- Fri Oct 07, 2016 10:08 pm
- Forum: FlashPro Manager
- Topic: Overrun Injector Settings
- Replies: 13
- Views: 8331
Re: Overrun Injector Settings
I have the same problem on my 12 tsx. Very jerky when getting on and off the pedal. I can see my motor mounts going very soon. How can we disable the injector from turning off while deceleration? Id rather keep my injectors on then feel the engine bounce back and forth. I set the value to cut 2500 ...
- Mon Oct 03, 2016 10:07 am
- Forum: TSX 2004-2014
- Topic: Full throttle Shifting for TSX
- Replies: 31
- Views: 44505
Re: Full throttle Shifting for TSX
No. unless my tuner did. But probably not.
- Fri Sep 30, 2016 12:31 pm
- Forum: TSX 2004-2014
- Topic: Full throttle Shifting for TSX
- Replies: 31
- Views: 44505
Re: Full throttle Shifting for TSX
hi, guys, do you run N/A setup with stock injectors, or ? Just have spent a lot of time to find smooth shifting on A/T CU2-turbo, but there were larger injectors, larger AFM diameter and MAP-based tune All my info is in my sig below each of my posts. Ssjoeboe is rocking bigger injectors and higher ...
- Thu Sep 29, 2016 10:42 am
- Forum: FlashPro Manager
- Topic: Overrun Injector Settings
- Replies: 13
- Views: 8331
Re: Overrun Injector Settings
I have the same problem on my 12 tsx. Very jerky when getting on and off the pedal. I can see my motor mounts going very soon.
How can we disable the injector from turning off while deceleration?
Id rather keep my injectors on then feel the engine bounce back and forth.
How can we disable the injector from turning off while deceleration?
Id rather keep my injectors on then feel the engine bounce back and forth.
- Wed Sep 28, 2016 10:15 am
- Forum: TSX 2004-2014
- Topic: Full throttle Shifting for TSX
- Replies: 31
- Views: 44505
Re: Full throttle Shifting for TSX
I can't believe it's been over a month and still no answer.
- Sun Sep 18, 2016 7:29 pm
- Forum: TSX 2004-2014
- Topic: Shift light
- Replies: 1
- Views: 2668
Shift light
Is there an option for a programmable shift light in flashpro? I remember in the obd1 chip burning days I had that option. The engine check light would light up when the desired shift point was hit.
- Tue Sep 06, 2016 12:32 pm
- Forum: TSX 2004-2014
- Topic: Full throttle Shifting for TSX
- Replies: 31
- Views: 44505
Re: Full throttle Shifting for TSX
What he said.ssjoeboe9 wrote:Is there any update on the status of this?