Search found 13 matches

by AlwaysInVtec
Sun Jan 17, 2016 8:28 pm
Forum: s300 / SManager
Topic: Possible To Tune Fuel Overrun/Map For Exhaust Crackle?
Replies: 11
Views: 31233

Re: Possible To Tune Fuel Overrun/Map For Exhaust Crackle?

Hmm. I've heard of fuel wash before, although I thought that only occurred under extremely rich condition, for example anything below like 10.0 afr. Figured keeping the afr's a bit leaner around what the car would normally see under normal driving conditions it would be okay. If that's not the case ...
by AlwaysInVtec
Sun Jan 17, 2016 6:28 pm
Forum: s300 / SManager
Topic: Possible To Tune Fuel Overrun/Map For Exhaust Crackle?
Replies: 11
Views: 31233

Re: Possible To Tune Fuel Overrun/Map For Exhaust Crackle?

I finally figured it out!!! I adjusted the "Overrun Fuel Cutoff" setting to "Overrun Fuel Cutoff TPS" Throttle : -10% Delay : 10ms "Overrun Fuel Cutoff MAP" KPa : 8 (across the entire table) "Overrun Fuel Cutoff Initial & Return" RPM : 8000 (across both ta...
by AlwaysInVtec
Thu Jan 14, 2016 9:58 am
Forum: s300 / SManager
Topic: Possible To Tune Fuel Overrun/Map For Exhaust Crackle?
Replies: 11
Views: 31233

Possible To Tune Fuel Overrun/Map For Exhaust Crackle?

This is going to sound like a really stupid question and honestly it kind of is. Is there any possible way to tune the fuel overrun or any part of the map so that the exhaust has a burble, crackle, or popping sound like the srt4's and the f40 have? I know it's something in the way those cars are tun...
by AlwaysInVtec
Sat May 30, 2015 5:24 pm
Forum: K-Pro / KManager
Topic: Bluetooth won't connect - Kpro4
Replies: 9
Views: 8084

Re: Bluetooth won't connect - Kpro4

Did you ever figure out what the problem was? Or get it fixed? I'm having this exact same problem with my galexy s5 and my s300 v3. It worked fine on my blackberry z10, but now that I got this new s5 it wont connect just like yours. Any info on how you fixed it, if you fixed it would be greatly appr...
by AlwaysInVtec
Fri May 15, 2015 9:48 pm
Forum: s300 / SManager
Topic: Possible Rolling Anti lag/launch control Setup?
Replies: 7
Views: 10103

Re: Possible Rolling Anti lag/launch control Setup?

Ooooh well sadly my car doesn't have that switch either. RS, base model. No cruise and no clutch switch for some reason. I've never had to push the clutch to start the car. Thanks for the help Anyway this is how I did it I got it all figured out yesterday. I called my friend and he walked me through...
by AlwaysInVtec
Thu May 14, 2015 10:59 pm
Forum: s300 / SManager
Topic: Possible Rolling Anti lag/launch control Setup?
Replies: 7
Views: 10103

Re: Possible Rolling Anti lag/launch control Setup?

I got it all figured out. Will explain tomorrow...need sleep
by AlwaysInVtec
Thu May 14, 2015 3:10 pm
Forum: s300 / SManager
Topic: Possible Rolling Anti lag/launch control Setup?
Replies: 7
Views: 10103

Re: Possible Rolling Anti lag/launch control Setup?

So I just checked that D4 scs pin. It sees 5v without the scs being jumped and sees 0v with it jumped. I'm gonna guess that's not a 12v pin and I shouldn't put 12v into it Edit: I just read this from Hondata's help page. "SCS - Activates when grounded. Normal function is to read error codes.&qu...
by AlwaysInVtec
Thu May 14, 2015 2:09 pm
Forum: s300 / SManager
Topic: Possible Rolling Anti lag/launch control Setup?
Replies: 7
Views: 10103

Re: Possible Rolling Anti lag/launch control Setup?

Is there a way to know which input is a 12v or a ground? Hondata doesn't list that, it just shows the options for which pins can be used. I guess I would need to hook a volt meter up to the D4 pin and to a ground, then jump that service connector and see if it reads 12v. You mentioned the clutch swi...
by AlwaysInVtec
Tue May 12, 2015 11:08 pm
Forum: s300 / SManager
Topic: Possible Rolling Anti lag/launch control Setup?
Replies: 7
Views: 10103

Possible Rolling Anti lag/launch control Setup?

So I saw this video earlier where this guy was using the launch control feature while he was driving at speed by pulling the washer stalk. Said video : https://www.youtube.com/watch?v=OzqHX8vu2U0 I also found a thread on another forum where he explains how he got it to work, although he was using Kp...
by AlwaysInVtec
Wed Mar 18, 2015 5:32 pm
Forum: s300 / SManager
Topic: Datalog wont record correct afr numbers
Replies: 8
Views: 3296

Re: Datalog wont record correct afr numbers

I didn't have to connect the ground for it. Got it working finally. Thanks for the info and help!
by AlwaysInVtec
Wed Mar 18, 2015 12:40 pm
Forum: s300 / SManager
Topic: Datalog wont record correct afr numbers
Replies: 8
Views: 3296

Re: Datalog wont record correct afr numbers

Oh ok. Um, which one do you suggest using? Another question. If I hook the analog input power wire up to whatever pin, do I hook the analog ground wire from the gauge to the ecu in the sg1 or sg2 ground pin (d21/d22)? Or do I run that analog ground wire to the thermostat housing where the ecu is gro...
by AlwaysInVtec
Wed Mar 18, 2015 12:11 pm
Forum: s300 / SManager
Topic: Datalog wont record correct afr numbers
Replies: 8
Views: 3296

Re: Datalog wont record correct afr numbers

Oooh ok, thanks! I didn't know that. Makes sense why Hondata can see it, but the ecu itself can't. I'll try and hook it up to D14 and see how it acts then. In doing that though, does it mean it will only read if closed loop is turned on? Or will it still work even in open loop?
by AlwaysInVtec
Tue Mar 17, 2015 9:56 pm
Forum: s300 / SManager
Topic: Datalog wont record correct afr numbers
Replies: 8
Views: 3296

Datalog wont record correct afr numbers

So I'm having an issue trying to datalog my air to fuel ratios. For some reason in the "recorded lambda table" it wont show anything but 17.65 and in the "estimated change" table it only shows 16% and 23% even though in the Display window it's reading the correct afr that my gaug...