Search found 18 matches
- Sun May 26, 2019 8:00 am
- Forum: K-Pro / KManager
- Topic: AIM MXS Strada and Kpro Oil Pressure
- Replies: 13
- Views: 4874
Re: AIM MXS Strada and Kpro Oil Pressure
AIM CAN protocols dont work wholly correctly for Analog inputs from the krpo. The Sensors are to be set the channels AIM has coded into the CAN protocol to work. Its hard set in the protocol to match the sensors. I've never been able to have the correct mV translate from the KRPO to the AIM. Im curr...
- Sun Jun 24, 2018 6:48 pm
- Forum: K-Pro / KManager
- Topic: Throttle too sensitive when on to off
- Replies: 7
- Views: 1861
Re: Throttle too sensitive when on to off
You may also try adjusting the idle solenoid duty if you feel the rpms are dipping too greatly.
- Sat Apr 02, 2016 3:40 am
- Forum: K-Pro / KManager
- Topic: KPRO V4 IQ3 Output
- Replies: 16
- Views: 5511
Re: KPRO V4 IQ3 Output
Yes you can try it but I would not run it that way. So , I configured my ZT-3 to match the wideband output of the PLX SM-AFR . 0v - 0.68lambda , 5v - 1.36 lambda . RACEPAK.png Changed my kal to reflect SM-AFR preconfiguration to AN0 . Uploaded config to KPRO . At Ign on , dash will display a static...
- Fri Apr 01, 2016 11:04 am
- Forum: K-Pro / KManager
- Topic: KPRO V4 IQ3 Output
- Replies: 16
- Views: 5511
Re: KPRO V4 IQ3 Output
Only the ones listed in the analog input window. I'm not sure exactly when it will be released. It could be in a few days. Would it be possible to test using the calibrations in the drop down menu just to see read out on ththe cluster to test function but not have an accurate indication ? Thank you...
- Fri Apr 01, 2016 9:42 am
- Forum: K-Pro / KManager
- Topic: KPRO V4 IQ3 Output
- Replies: 16
- Views: 5511
Re: KPRO V4 IQ3 Output
The current version of software does not support your version of wideband and it will not display it. You will need to wait until the release of the next version of software in which it will be added. Is there a list of supported wide bands at the current software version ? Are you able to divulge ...
- Thu Mar 31, 2016 5:39 pm
- Forum: K-Pro / KManager
- Topic: KPRO V4 IQ3 Output
- Replies: 16
- Views: 5511
Re: KPRO V4 IQ3 Output
There will be a release of software soon to allow this to work. So , should I not be expected to see my AF1 input to my racepak dash refreshing at this time? 3_31_kal.kal 3_31_datalog.kdl Attached are current kal and datalog . If you notice sometime funny with the base kal (dual adapter or not) ple...
- Thu Mar 31, 2016 9:56 am
- Forum: K-Pro / KManager
- Topic: KPRO V4 IQ3 Output
- Replies: 16
- Views: 5511
Re: KPRO V4 IQ3 Output
With that said . Is the kpro4 paired to an iq3 capable of displaying this wbo2 information ?
- Thu Mar 31, 2016 9:49 am
- Forum: K-Pro / KManager
- Topic: KPRO V4 IQ3 Output
- Replies: 16
- Views: 5511
Re: KPRO V4 IQ3 Output
I'll download again when i arrive home .
- Wed Mar 30, 2016 5:07 pm
- Forum: K-Pro / KManager
- Topic: KPRO V4 IQ3 Output
- Replies: 16
- Views: 5511
Re: KPRO V4 IQ3 Output
Requested files attached.
- Wed Mar 30, 2016 4:52 pm
- Forum: K-Pro / KManager
- Topic: KPRO V4 IQ3 Output
- Replies: 16
- Views: 5511
Re: KPRO V4 IQ3 Output
Current calibration is attached to post.
I will grab a datalog now.
I will grab a datalog now.
- Wed Mar 30, 2016 4:46 pm
- Forum: K-Pro / KManager
- Topic: KPRO V4 IQ3 Output
- Replies: 16
- Views: 5511
Re: KPRO V4 IQ3 Output
No stock narrowband. I have a zeitronix ZT-3 wired into analog for WBo2.
- Wed Mar 30, 2016 4:34 pm
- Forum: K-Pro / KManager
- Topic: KPRO V4 IQ3 Output
- Replies: 16
- Views: 5511
KPRO V4 IQ3 Output
10_19_15_pre_id_change.kal Hello Hondata support. I have a 2001 Ap1 s2000 with a PRB KPRO V4 installed. I am currently trying to interface the KPRO ECU to an IQ3 street dash using Racepak 230-VM-EFIHOND module wired to TTL OUT (black) on KPRO. So far , everything is being displayed on the dash asid...
- Wed Apr 15, 2015 10:31 am
- Forum: K-Pro / KManager
- Topic: KPRO4 / AP1 S2000 P0335
- Replies: 8
- Views: 2516
Re: KPRO4 / AP1 S2000 P0335
Issue is resolved. NO DTCs. Followed by pin assignments as your recommendation. Followed D-plug assignments as follows: Inverted my understanding of Pin 1 on Cam and Crank sensors in reference to those pics above. http://s13.postimg.org/4046o2upz/IMG_0567.png From the wire side of each plug with the...
- Tue Apr 14, 2015 11:57 am
- Forum: K-Pro / KManager
- Topic: KPRO4 / AP1 S2000 P0335
- Replies: 8
- Views: 2516
Re: KPRO4 / AP1 S2000 P0335
Wired as stated above .
No rpm is registered but no DTCs are displayed in error logs
No rpm is registered but no DTCs are displayed in error logs
- Tue Apr 14, 2015 10:58 am
- Forum: K-Pro / KManager
- Topic: KPRO4 / AP1 S2000 P0335
- Replies: 8
- Views: 2516
Re: KPRO4 / AP1 S2000 P0335
With above wiring scheme in place . Voltages with Ignition on are as follows:
Crank pin 1 – GRND
Crank pin 3 – V +
DMM read – 5.02 Ign on.
Cam Pin 1 – v+
Cam pin 3 – GRND
DMM read – 7.04V Ign on .
Crank pin 1 – GRND
Crank pin 3 – V +
DMM read – 5.02 Ign on.
Cam Pin 1 – v+
Cam pin 3 – GRND
DMM read – 7.04V Ign on .