Search found 11 matches

by coupe-r
Wed Jun 30, 2021 5:54 pm
Forum: K-Pro / KManager
Topic: Weird MAP sensor issue
Replies: 20
Views: 3497

Re: Weird MAP sensor issue

The values must be measured with the ignition on, but the engine not running. So I assume you are saying the map pressure changes with throttle position WITHOUT THE ENGINE RUNNING? There is obviously some TPS/MAP related trikery going on if this is the case. I'll get Brent to try exactly that (whil...
by coupe-r
Tue Jun 29, 2021 2:58 pm
Forum: K-Pro / KManager
Topic: Weird MAP sensor issue
Replies: 20
Views: 3497

Re: Weird MAP sensor issue

Its stated in the help file yes. Explained how to set them (especially the closed value) or WHAT they are used for is what we want to know please. I assume this affects fuel cut settings as this car has an issue not getting out of fuel cut decel even when throttle input is used. "Map value with...
by coupe-r
Tue Jun 29, 2021 12:42 pm
Forum: K-Pro / KManager
Topic: Weird MAP sensor issue
Replies: 20
Views: 3497

Re: Weird MAP sensor issue

Are the map sensor values with throttle open and closed not ACTUAL values? If we are to enter the values with ignition on engine not running? If this is the case I’d suggest updating be help file on this section. What are those values used for exactly? I assume the Ecu is sent a derived map value ba...
by coupe-r
Wed May 16, 2018 7:30 pm
Forum: s300 / SManager
Topic: S300J V1 Solid Red Light D1
Replies: 5
Views: 2243

Re: S300J V1 Solid Red Light D1

Well its not end user replaceable indeed ;) Ok so I can re download my maps from the S300 days later perfectly? You still think bad battery? Wouldn't a bad battery cause the map to get corrupted/not hold in memory? You are 100% its not a CN2 or 28 pin connection issue on the hondata itself? My sympt...
by coupe-r
Tue May 15, 2018 8:10 pm
Forum: s300 / SManager
Topic: S300J V1 Solid Red Light D1
Replies: 5
Views: 2243

Re: S300J V1 Solid Red Light D1

I thought so too, however when the battery dies doesn't this stop uploads and downloads? Yet the map downloads and looks correct and erases. I wonder if it has a CN2 or 28pin connection issue.... I have recommended the customer upgrade to the Hondata V3. (any comments on me replacing the battery.......
by coupe-r
Tue May 15, 2018 4:17 am
Forum: s300 / SManager
Topic: S300J V1 Solid Red Light D1
Replies: 5
Views: 2243

S300J V1 Solid Red Light D1

Hello from NZ! - serial number:S300J-1,092 - 2.6.6 - P30 and P08. Hondata S300J V1, uploads/downloads, erases. Won't DATALOG! and ECU in limp mode (injectors batch fire, solid CEL) Solid red light at D1, green light at D4. Enabling datalogging flashes D2 every few seconds (but no datalogging) Socket...
by coupe-r
Wed May 04, 2016 3:37 am
Forum: s300 / SManager
Topic: S300 V3 Wideband Digital input and closed loop?
Replies: 6
Views: 4936

Re: S300 V3 Wideband Digital input and closed loop?

Ok so more than a year on...

Can the digital input be used to populate the lambda difference table while tuning?

Can Smanager log innovate serial stream directly from the laptops USB port? Then use this to populate the lambda difference table.
by coupe-r
Sun Nov 08, 2015 2:12 pm
Forum: s300 / SManager
Topic: SManager software requests
Replies: 336
Views: 1515296

Re: SManager software requests

DIRECT SERIAL LOGGING (Innovate products) That is all...... Other products been doing this for YEARS. Takes out the ground offsets, noise etc. Live tuning is MUCH better and faster sample rate. S300 V3 you say? Well you can't log the Digital air fuel ratio into the fuel tables for lambda % offset an...
by coupe-r
Mon Mar 23, 2015 7:36 pm
Forum: s300 / SManager
Topic: S300 V3 Wideband Digital input and closed loop?
Replies: 6
Views: 4936

Re: S300 V3 Wideband Digital input and closed loop?

If digital input can't populate the lambda trace table (for tuning) Then it's only ticking one box for me and that's logging a digital AFR with no laptop in the car (low priority for me as I have a MTX-L gauge anyways) The biggest plus would have been populating the lambda trace table for cell by ce...
by coupe-r
Mon Mar 09, 2015 5:32 pm
Forum: s300 / SManager
Topic: S300 V3 Wideband Digital input and closed loop?
Replies: 6
Views: 4936

Re: S300 V3 Wideband Digital input and closed loop?

Cheers for your reply. Hmmm this is something that should be changed for the next Smanager release then ;) In that case I assume it doesn't support lean protection via the digital input either. Ok so what about Question 1 (does digital input populate the lambda trace table? So I can tune by % lambda...
by coupe-r
Sun Mar 08, 2015 8:18 pm
Forum: s300 / SManager
Topic: S300 V3 Wideband Digital input and closed loop?
Replies: 6
Views: 4936

S300 V3 Wideband Digital input and closed loop?

Hi there, I am considering purchasing a S300 V3 for the digital input features. I am the coordinator for the Motul Honda Cup New Zealand so we deal with Doug and Hondata :) http://hondacup.co.nz Q1: Can the digital input be used to populate the target lambda difference table (Lamda trace)? Or must a...