Search found 12 matches
- Wed Jan 20, 2016 12:18 pm
- Forum: K-Pro / KManager
- Topic: EP3 stalls after getting gas. evap code
- Replies: 23
- Views: 8533
Re: EP3 stalls after getting gas. evap code
Just an update for anyone with this problem. This WAS due to a software update. Once I updated my KPRO to the latest update, The check engine light and problem have gone away. I did not replace a single thing other then updateded the software on the ECU. Hope this helps anyone else out.
- Wed May 07, 2014 7:04 am
- Forum: K-Pro / KManager
- Topic: EP3 stalls after getting gas. evap code
- Replies: 23
- Views: 8533
Re: EP3 stalls after getting gas. evap code
So my TPS needs to be adjusted correctly? What exactly do you mean "where it gets into closed loop first?" Would that be datalogging it after the stale out for a minute or two so the oxygen sensor can read and adjust the afr's?
- Tue May 06, 2014 5:52 pm
- Forum: K-Pro / KManager
- Topic: EP3 stalls after getting gas. evap code
- Replies: 23
- Views: 8533
Re: EP3 stalls after getting gas. evap code
Here is a datalog of my car stalling after getting gas. Also i got the Serial Number. 14052 (thats what shows up in my kmanager)
Thanks
Thanks
- Sun May 04, 2014 7:35 am
- Forum: K-Pro / KManager
- Topic: EP3 stalls after getting gas. evap code
- Replies: 23
- Views: 8533
Re: EP3 stalls after getting gas. evap code
I didnt know what kind of datalog you guys wanted so i just did a basic mid throttle and full throttle.. i can get a datalog the next time i get gas.
- Sat May 03, 2014 9:55 pm
- Forum: K-Pro / KManager
- Topic: EP3 stalls after getting gas. evap code
- Replies: 23
- Views: 8533
Re: EP3 stalls after getting gas. evap code
And here is a datalog. let me know if this works for you.
- Sat May 03, 2014 9:50 pm
- Forum: K-Pro / KManager
- Topic: EP3 stalls after getting gas. evap code
- Replies: 23
- Views: 8533
Re: EP3 stalls after getting gas. evap code
Here is my calibration
- Fri May 02, 2014 11:29 am
- Forum: K-Pro / KManager
- Topic: EP3 stalls after getting gas. evap code
- Replies: 23
- Views: 8533
Re: EP3 stalls after getting gas. evap code
I will upload my calibration and a datalog today or tomorrow for you to look at. I hope its just a setting..
- Fri May 02, 2014 10:14 am
- Forum: K-Pro / KManager
- Topic: EP3 stalls after getting gas. evap code
- Replies: 23
- Views: 8533
Re: EP3 stalls after getting gas. evap code
My first posting states I am using 3.3.1. And I also stated that I am using your k20a3 low octane us civic si kal. The ecu is out of my car atm so I can't give you a datalog. Would it just be easier to call you guys? Why would I check helms if it's a problem with the ecu? The car has no CEL with the...
- Fri May 02, 2014 5:31 am
- Forum: K-Pro / KManager
- Topic: EP3 stalls after getting gas. evap code
- Replies: 23
- Views: 8533
Re: EP3 stalls after getting gas. evap code
Can i please get some help with your product?
Thank you
Thank you
- Thu May 01, 2014 2:18 pm
- Forum: K-Pro / KManager
- Topic: EP3 stalls after getting gas. evap code
- Replies: 23
- Views: 8533
Re: EP3 stalls after getting gas. evap code
What i mean by others having the problem is the 05-06 RSX not having an evap sensor, which i saw you guys (hondata) suggested to disable the EVAP system to fix the problem. As far as stalling after getting gas, i dont think that was a problem on the RSX. Is this a problem with just the EP civic? Its...
- Thu May 01, 2014 11:47 am
- Forum: K-Pro / KManager
- Topic: EP3 stalls after getting gas. evap code
- Replies: 23
- Views: 8533
Re: EP3 stalls after getting gas. evap code
Ya i have noticed this is a common problem on the EP/RSX once they get kpro installed.. thankfully i got my stock ecu to run in the mean time
- Thu May 01, 2014 8:12 am
- Forum: K-Pro / KManager
- Topic: EP3 stalls after getting gas. evap code
- Replies: 23
- Views: 8533
EP3 stalls after getting gas. evap code
- 02 Civic Si ep3 - serial number of your K-Pro? - ECU part number (starts with 37820) and serial number (the number under the part number) (37820-PNF-A05) (966719-2Y28) - v3.3.1 - EP3 low octane tune (the basic one on calibrations) - No datalog available - SRI, mangaflow catback exhaust - Feb 24 20...