Search found 24 matches
- Wed Mar 04, 2015 7:38 pm
- Forum: K-Pro / KManager
- Topic: New user v4 problem
- Replies: 5
- Views: 1736
Re: New user v4 problem
Did you calibrate your TPS? If so, you may have to replace your TPS as it's pretty common to hit that 2500rpm wall with a faulty TPS. If not, calibrate it and see if that helps.
- Thu Dec 11, 2014 6:20 pm
- Forum: K-Pro / KManager
- Topic: KManager V4.0.7
- Replies: 18
- Views: 11517
Re: KManager V4.0.3
YesEGK2082 wrote:kManager v4 can be used with kproIII?
- Mon Dec 01, 2014 7:11 pm
- Forum: Applications
- Topic: Flashpro for R18Z1 aka 2012 civic??
- Replies: 18
- Views: 15387
Re: Flashpro for R18Z1 aka 2012 civic??
Spunkster wrote:We are working on this now.
Great news! I know a couple of people that will be happy to hear this.
- Wed May 14, 2014 3:15 pm
- Forum: K-Pro Calibrations
- Topic: can someone help me with a base map. cai/e/rh/rbc/hondata im
- Replies: 3
- Views: 2851
Re: can someone help me with a base map. cai/e/rh/rbc/hondat
Here is one that is supplied from Hondata. It should be more than good enough for your setup until you get it tuned!
- Sun May 11, 2014 8:13 am
- Forum: K-Pro Calibrations
- Topic: Sharing Tuned K24a2 basemap
- Replies: 8
- Views: 4767
Re: Sharing Tuned K24a2 basemap
You're right about it only reaching column 8. Any reasons why that would be?
- Sun May 04, 2014 6:46 am
- Forum: K-Pro Calibrations
- Topic: Sharing Tuned K24a2 basemap
- Replies: 8
- Views: 4767
Re: Sharing Tuned K24a2 basemap
It is indeed dynotuned.
- Sat May 03, 2014 8:53 am
- Forum: K-Pro Calibrations
- Topic: Sharing Tuned K24a2 basemap
- Replies: 8
- Views: 4767
Re: Sharing Tuned K24a2 basemap
I should also add, he bought the car this way and had been given a list of the modifications done so the only way to verify what has been done would be to tear it down, something that he is not capable of doing.
- Sat May 03, 2014 8:46 am
- Forum: K-Pro Calibrations
- Topic: Sharing Tuned K24a2 basemap
- Replies: 8
- Views: 4767
Re: Sharing Tuned K24a2 basemap
Yea I'm doubting that it has a 50* vtc gear installed. This is actually a friends tune that I'm sharing so I gave the info that he had given me. I bet if the valve cover was pulled off it would reveal a 25* gear. Also, to me the power seems low for the compression it claims to have. I'll be posting ...
- Mon Apr 21, 2014 2:48 pm
- Forum: K-Pro Calibrations
- Topic: Sharing Tuned K24a2 basemap
- Replies: 8
- Views: 4767
Sharing Tuned K24a2 basemap
Was asked to remove, sorry!
- Fri Apr 11, 2014 6:43 pm
- Forum: K-Pro / KManager
- Topic: Using a Kpro chipped PNF ECU
- Replies: 2
- Views: 1835
Re: Using a Kpro chipped PNF ECU
Thank you very much!
- Fri Apr 11, 2014 3:11 pm
- Forum: K-Pro / KManager
- Topic: Using a Kpro chipped PNF ECU
- Replies: 2
- Views: 1835
Using a Kpro chipped PNF ECU
I have the opportunity to pick up a PNF ECU for a good price. The part number is 37820-PNF-A05 and is already equipped with kpro. What I would like to know is if this is compatible with my setup? I have an 02 rsx-s with an 08 k24a2 swapped in. The engine harness and transmission are original from th...
- Tue Jan 07, 2014 6:45 pm
- Forum: K-Pro / KManager
- Topic: K24a2 VTC cam and camcmd read 0
- Replies: 18
- Views: 10283
Re: K24a2 VTC cam and camcmd read 0
Are you familiar with that circuit? Is it related to the VTC function?
- Sun Jan 05, 2014 2:59 pm
- Forum: K-Pro / KManager
- Topic: K24a2 VTC cam and camcmd read 0
- Replies: 18
- Views: 10283
Re: K24a2 VTC cam and camcmd read 0
Ok. I bought another ECU with version 3 but haven't tried it out yet. I brought my damaged ECU with me to have it looked over and the shops tech noticed something on the piece at IC390 on the board. He opened up 2 other ECU's and they looked fine. Now my question to you is, can this piece be replace...
- Thu Jan 02, 2014 6:10 pm
- Forum: K-Pro / KManager
- Topic: K24a2 VTC cam and camcmd read 0
- Replies: 18
- Views: 10283
Re: K24a2 VTC cam and camcmd read 0
Thank you very much! Did you see anything out of the ordinary? I'll give that shop a shout but I don't expect them to do anything about it. I did buy it used so my own fault.
- Thu Jan 02, 2014 3:22 pm
- Forum: K-Pro / KManager
- Topic: K24a2 VTC cam and camcmd read 0
- Replies: 18
- Views: 10283
Re: K24a2 VTC cam and camcmd read 0
Woah! I apologize for the huge pics. Didn't think they would show up like that. Sorry!