Search found 23 matches

by JKOBD
Mon Oct 28, 2013 3:11 pm
Forum: s300 / SManager
Topic: Datalogging Issues....
Replies: 7
Views: 2214

Re: Datalogging Issues....

Ok so I tried it with the laptop connected and flipping the switch and then run it for 10 secs and shut off and attempted to pull the log and nothing was there. I disconnected the laptop and tried the same thing. A log was generated and stored. Works every time I've tried it without the laptop conne...
by JKOBD
Mon Oct 28, 2013 11:29 am
Forum: s300 / SManager
Topic: Datalogging Issues....
Replies: 7
Views: 2214

Re: Datalogging Issues....

That was what I knew was true also and therefore the reason I checked it afterwards. I will attempt to clear all datalogs, save and upload again and remove the laptop. I'll drive and flip the switch and log to see if it saved anything.

Thanks for your help.
by JKOBD
Mon Oct 28, 2013 11:21 am
Forum: s300 / SManager
Topic: Datalogging Issues....
Replies: 7
Views: 2214

Re: Datalogging Issues....

The laptop is connected and each attempt at datalogging has been while flipping the switch and looking at the graph. In addition, after doing so I have looked in the datalog files to see if a new file has been generated. I have not attempted to remove the laptop and drive, flip switch on/off and ins...
by JKOBD
Mon Oct 28, 2013 10:16 am
Forum: s300 / SManager
Topic: Datalogging Issues....
Replies: 7
Views: 2214

Re: Datalogging Issues....

That is correct. Unchecked enabled datalog, deleted all logs, checked enable datalog and saved and uploaded. Still nothing.
by JKOBD
Sun Oct 27, 2013 2:36 pm
Forum: s300 / SManager
Topic: Datalogging Issues....
Replies: 7
Views: 2214

Datalogging Issues....

S300 V2, 2.2.7.0 version. P28 ecu. 2000 Civic, B-series, turbo. No CELs. Car will datalog when F9 is pressed. Car connects no problem with F10. Datalog does not drop out during idle or during a run with the laptop in the car connected. Car made passes last week and recorded to 10,500 rpm no issues. ...
by JKOBD
Mon Feb 06, 2012 8:51 pm
Forum: s300 / SManager
Topic: SManager V2.0.0 (beta)
Replies: 23
Views: 7379

Re: SManager V2.0.0 (beta)

Are any of those analog inputs able to log Bosch two wire temperature sensors? Trying to datalog transmission temperature.
by JKOBD
Fri Dec 30, 2011 5:26 pm
Forum: s300 / SManager
Topic: SManager software requests
Replies: 308
Views: 108980

Re: SManager software requests

Need more analog inputs. I am needing to log fuel pressure, oil pressure, back pressure, compressor pressure and crank case pressure. 2 analog inputs aren't enough.
by JKOBD
Mon Mar 22, 2010 7:43 pm
Forum: s300 / SManager
Topic: Code 8
Replies: 16
Views: 4544

All of the wire is MS22759 wire. All of the distributor wiring is shielded, twisted. The shielded wire is terminated into a pin at the MS connector on the firewall and passed through. All of the distributor wires are isolated away from all of the other pins and are also jacketed/shrunk with DR-25 by...
by JKOBD
Wed Jul 08, 2009 7:23 am
Forum: K-Pro / KManager
Topic: K20 Swap Wiring Issue
Replies: 9
Views: 4416

Glad they took care of it. All is well now. It didn't sound like a problem from battery relocation.
by JKOBD
Tue Dec 23, 2008 12:17 pm
Forum: s300 / SManager
Topic: Options for second set of injectors...
Replies: 4
Views: 2104

Preyluda wrote:Whats up mang! This is Jimmy Jones friend Jay(with the old beat up '88 prelude). How's things going for ya?

you should send me your email in case i ever need you to look at my calibration, or are you on honda-tech.

Sorry for the off topic.
Blown90hatcH on H-T.

Thanks for the free bump!
by JKOBD
Mon Dec 15, 2008 11:31 am
Forum: s300 / SManager
Topic: Options for second set of injectors...
Replies: 4
Views: 2104

Options for second set of injectors...

Any chances to get something in the works for running another set of staged injectors in S300? I guess since this is based on the stock ecu, and that only has four injector drivers than no love.....but any work around this? Maybe use the V6 ecu and run bank to bank on a set of injectors...I dunno......
by JKOBD
Mon Dec 15, 2008 11:18 am
Forum: s300 / SManager
Topic: way to test boost control components?
Replies: 7
Views: 3425

Just using 0 and 100% are not good tests. You should start with 5% and do 5% increment increases to see when you are close to the threshhold for boost you want. He is speaking hypothetically. I am sure he tried many different settings and he stating that no matter what settings he uses, it does not...
by JKOBD
Wed Feb 22, 2006 7:08 pm
Forum: s100/s200
Topic: FJO injector driver / Romulator / Solid CEL
Replies: 8
Views: 3193

Yes. Still did not work. I have already contacted Transtronics and they gave me the pull soft / pull hard deal, but that didn't work. I took Friday off so I could make it to a race so I will work on it then and see if I can make some progress.
by JKOBD
Tue Feb 21, 2006 9:40 pm
Forum: s100/s200
Topic: FJO injector driver / Romulator / Solid CEL
Replies: 8
Views: 3193

Tried everything but remove the FJO. Was hoping to fix it without having to remove it.
by JKOBD
Tue Feb 21, 2006 11:33 am
Forum: s100/s200
Topic: FJO injector driver / Romulator / Solid CEL
Replies: 8
Views: 3193

Stays in limp mode. Solid CEL and the hondata box flashes the same. With the rom burned and installed in the ecu, the car runs great, hondata box does not flash and I can log via hondalogger. The romulator says its connector when I have the key on and in the correct com port. Ctrl W, cyles the main ...