Search found 81 matches
- Mon Oct 02, 2017 6:11 pm
- Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
- Topic: Jerky shift daily drive
- Replies: 3
- Views: 2869
Re: Jerky shift daily drive
Try this. Using VTC tables during overrun should smooth tip-in and I adjusted the overrun MAP pressures to smooth tip-out. You may notice some more rev hang but you can probably put the fuel cut delay lower or back to stock without having much effect on the jerkiness.
- Sat Oct 08, 2016 8:00 am
- Forum: FlashPro Calibrations
- Topic: 08 Si Hybrid Racing CAI Calibration Help
- Replies: 23
- Views: 10515
Re: 08 Si Hybrid Racing CAI Calibration Help
The calibration here is an altered RRB cal. You should see Civic-Si-Race-... in the new calibration window for the Race cals. Might have to check a box under the filters.
- Sat Oct 08, 2016 5:09 am
- Forum: FlashPro Calibrations
- Topic: 08 Si Hybrid Racing CAI Calibration Help
- Replies: 23
- Views: 10515
Re: 08 Si Hybrid Racing CAI Calibration Help
None of the fuel tables in the 'RRB' cals have been adjusted from default, as they were meant to be run with the AFM for fueling. You may have better luck copying the fuel tables from the 'Race' calibration, which were tuned, into your map. Be aware that the fuel table scaling is different between t...
- Tue Oct 04, 2016 3:37 am
- Forum: FlashPro Calibrations
- Topic: 08 Si Hybrid Racing CAI Calibration Help
- Replies: 23
- Views: 10515
Re: 08 Si Hybrid Racing CAI Calibration Help
You should stop using that calibration before you damage your engine. It is running crazy lean above 6000 rpm.
- Fri Sep 30, 2016 3:59 am
- Forum: Civic Si 2006-2011 Americas
- Topic: Newbie looking to learn to tune.
- Replies: 5
- Views: 2738
Re: Newbie looking to learn to tune.
FlashPro help file has all the info you need.
- Thu Aug 18, 2016 7:41 pm
- Forum: FlashPro Manager
- Topic: FlashPro v2.4.8 Race Calibration issue
- Replies: 7
- Views: 4435
Re: FlashPro v2.4.8 Race Calibration issue
Did you reupload the calibration? If you upgrade FPM and try to datalog on a previously uploaded calibration, the sensor readings can be off.
- Thu Aug 18, 2016 6:16 pm
- Forum: FlashPro Manager
- Topic: Flashpro datalogging just save the last trip?
- Replies: 2
- Views: 1432
Re: Flashpro datalogging just save the last trip?
Any time you turn off the ignition the data log will end.
- Tue Aug 16, 2016 1:58 pm
- Forum: Civic Type R 2007-2011 European FN2
- Topic: General question K20 - popping/crackle noise for a "sport mode" possible?
- Replies: 25
- Views: 43795
Re: General question K20 - popping/crackle noise for a "sport mode" possible?
Could try increasing the overrun fuel cut delay or set the overrun cut rpm to 9000 or something so the injectors don't shut off.
- Tue Aug 16, 2016 10:01 am
- Forum: Civic Type R 2007-2011 European FN2
- Topic: General question K20 - popping/crackle noise for a "sport mode" possible?
- Replies: 25
- Views: 43795
Re: General question K20 - popping/crackle noise for a "sport mode" possible?
You also need to reduce ignition timing in the first two columns.
- Fri Aug 12, 2016 9:36 am
- Forum: FlashPro Manager
- Topic: Fuel Injection restart RPM
- Replies: 3
- Views: 1813
Re: Fuel Injection restart RPM
Then 1300 rpm may be the lower limit of what the ECU will allow.
- Thu Aug 11, 2016 7:49 am
- Forum: FlashPro Manager
- Topic: Fuel Injection restart RPM
- Replies: 3
- Views: 1813
Re: Fuel Injection restart RPM
See "Injector Overrun Cutoff" here: https://www.hondata.com/help/flashpro/t ... meters.htm
The engine may stall when coming to idle if you lower the recover rpm below 1300.
The engine may stall when coming to idle if you lower the recover rpm below 1300.
- Wed Aug 03, 2016 4:15 am
- Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
- Topic: Hondata update 2.4.5.0 problems
- Replies: 4
- Views: 3419
Re: Hondata update 2.4.5.0 problems
Your clutch switch (at the top of the pedal) may need to be adjusted.
- Fri Jul 29, 2016 6:10 am
- Forum: FlashPro Manager
- Topic: FlashProManager v2.4.9 Beta
- Replies: 98
- Views: 41912
Re: FlashProManager v2.4.5
Your custom tune is a "race" calibration and is no longer supported. You will need to redo the tune using one of the "RRB" starting calibrations.
- Thu Jun 30, 2016 3:58 am
- Forum: FlashPro Calibrations
- Topic: Terrible acceleration from a stop
- Replies: 14
- Views: 7008
Re: Terrible acceleration from a stop
The problem is your AFM reading incorrectly. Changing the intake from stock without re-scaling the AFM will cause the bogging you are experiencing. See: https://www.hondata.com/help/flashpro/tuning_afm_flow.htm Depending on how poorly the intake was designed, it may be easier to use speed density (M...
- Wed Jun 29, 2016 4:37 pm
- Forum: FlashPro Calibrations
- Topic: Terrible acceleration from a stop
- Replies: 14
- Views: 7008
Re: Terrible acceleration from a stop
You have disabled the AFM and are using MAP fuel tables?