Search found 6 matches

by honda1111gmail.com
Wed Sep 25, 2013 10:45 am
Forum: TSX 2004-2014
Topic: FlashPro manager 1.6.1 and TSX impossible to change AFR
Replies: 13
Views: 7144

Re: FlashPro manager 1.6.1 and TSX impossible to change AFR

Spunkster wrote:Without datalogs and calibration and very specific detials it is hard to determine if there is a problem or not.
here is one example on 1.5.6 (guys you have bugs for TSX, so please fix them)
it looks ok for you ? for me not very good !! Look at high 25 fuel table.
by honda1111gmail.com
Wed Sep 25, 2013 9:07 am
Forum: FlashPro Manager
Topic: FlashPro V1.6.3
Replies: 103
Views: 33925

Re: FlashPro V1.6.1

You need to post actual datalogs and the calibrations they were made with for us to look at anything. here is one example done on 1.5.6 Try unchecking the "use MAP to deterine WOT" See if that has any effect Unchecking doesn't do anything. Also there is impossible to tune some rpm points (rich spot...
by honda1111gmail.com
Mon Sep 23, 2013 9:44 pm
Forum: TSX 2004-2014
Topic: FlashPro manager 1.6.1 and TSX impossible to change AFR
Replies: 13
Views: 7144

Re: FlashPro manager 1.6.1 and TSX impossible to change AFR

Spunkster wrote:I do see a difference in the AF between 1 and 2 in the datalogs.
why removing fuel there is no changes ?
by honda1111gmail.com
Mon Sep 23, 2013 11:53 am
Forum: TSX 2004-2014
Topic: FlashPro manager 1.6.1 and TSX impossible to change AFR
Replies: 13
Views: 7144

Re: FlashPro manager 1.6.1 and TSX impossible to change AFR

Spunkster wrote:Where exactly in the calibration are you making the changes and at what point in the datalog are you not seing a change....RPM or timestamp?
2 points

2000 rpm
3000 rpm
check calibration fuel values (low cam) and you understand ;)
by honda1111gmail.com
Sun Sep 22, 2013 11:36 am
Forum: FlashPro Manager
Topic: FlashPro V1.6.3
Replies: 103
Views: 33925

Re: FlashPro V1.6.1

My car is set at 50deg vtc on cam angle low, at about 5000rpm. then the cam angle high table is all 50deg until abt 6000rpm before dropping to 30+deg at 9000rpm The funny thing is my car only runs 50deg when its running the cam angle low table. when its running the cam angle high table, it only did...
by honda1111gmail.com
Sat Sep 21, 2013 1:48 am
Forum: TSX 2004-2014
Topic: FlashPro manager 1.6.1 and TSX impossible to change AFR
Replies: 13
Views: 7144

FlashPro manager 1.6.1 and TSX impossible to change AFR

With FlashPro 1.6.1 it's impossible to change AFR in some points, removing/adding Fuel doesn't change anything basically. There was no such problems with Manager 1.4.5
Here is calibrations and corresponding logs.
rebuildFinal_1.fpcal original file and _2 with _3 fuel changes done.