Search found 36 matches

by Yungone501
Thu Nov 24, 2016 1:31 am
Forum: TL 2007-2008
Topic: IAT compensation
Replies: 4
Views: 11783

Re: IAT compensation

Let me first explain some new issues I'm having here lately and hopefully you can lead me in the right direction. I've switched from running pump gas to e85 and in the warmer months I had very little fluctuations in my AFRs but now that the cooler months are approaching, I've began to have some even...
by Yungone501
Thu Oct 20, 2016 11:12 pm
Forum: FlashPro Manager
Topic: Corrupted Datalogs on FlashPro
Replies: 2
Views: 2222

Re: Corrupted Datalogs on FlashPro

I know it's been some time since this thread was made but I wanted to share my experience with this same issue and retrieving corrupt datalog files from the FlashPro unit. I've noticed (in my case) ONLY when I datalog using a calibration file that's been Live Tuning enabled, it will do this. It's re...
by Yungone501
Mon Aug 22, 2016 7:24 pm
Forum: TL 2007-2008
Topic: IAT compensation
Replies: 4
Views: 11783

Re: IAT compensation

I'm assuming since the remaining question was disregarded, that translates to a "no"?

I am really struggling with this issue especially now that fall is beginning to show its face.
by Yungone501
Sun Aug 07, 2016 10:09 pm
Forum: TL 2007-2008
Topic: IAT compensation
Replies: 4
Views: 11783

IAT compensation

Was trying to narrow down an issue I've been having with low load knock and noticed something unusual so I assumed it best to ask instead of not knowing. The questions is, does the "air temperature fuel compensation cranking" table ONLY apply to cranking events or does it affect AFR's afte...
by Yungone501
Fri Jul 29, 2016 7:54 pm
Forum: TL 2007-2008
Topic: Acquiring "bricks" to build a new home here...
Replies: 8
Views: 11723

Re: Acquiring "bricks" to build a new home here...

Interesting. Got it. Thanks for the help. :)
by Yungone501
Thu Jul 28, 2016 7:02 pm
Forum: TL 2007-2008
Topic: Acquiring "bricks" to build a new home here...
Replies: 8
Views: 11723

Re: Acquiring "bricks" to build a new home here...

Really, where does it say this on FlashPro, did I overlook this? My last ECM did the same thing but was never informed to upload the log last time. Was there something different about this reported symptom/issue that clues you guys in on the need to mail in my ECM/FlashPro that I can know what to lo...
by Yungone501
Wed Jul 27, 2016 8:06 pm
Forum: TL 2007-2008
Topic: Acquiring "bricks" to build a new home here...
Replies: 8
Views: 11723

Re: Acquiring "bricks" to build a new home here...

Oddly enough, the ecu just accepted a reflash. It's working....for now. Please look at the log anyways and (hopefully) shed some light on what happened. Thanks again.
by Yungone501
Wed Jul 27, 2016 7:56 pm
Forum: TL 2007-2008
Topic: Acquiring "bricks" to build a new home here...
Replies: 8
Views: 11723

Re: Acquiring "bricks" to build a new home here...

Sent requested information just now. Thank you.
by Yungone501
Tue Jul 26, 2016 11:46 pm
Forum: TL 2007-2008
Topic: Acquiring "bricks" to build a new home here...
Replies: 8
Views: 11723

Acquiring "bricks" to build a new home here...

Around 1-2 years ago, I had an issue with my ECM not communicating suddenly after a reflash and after discussing the matter with you guys through email, it was decided that I would have to send my old ECM and FlashPro in to unlock the two so that it could be locked with a replacement ECM. Did that a...
by Yungone501
Fri Jul 15, 2016 6:44 pm
Forum: TL 2007-2008
Topic: Top speed limiter
Replies: 17
Views: 22332

Re: Top speed limiter

Automatics will only work properly with the stock map sensor, since we cannot reprogram the transmission code. It is looking only for stock map sensor voltages, so when a different map sensor is installed it throws it all off. Isn't it a bit premature in the conversation for us to presume it's the ...
by Yungone501
Fri Jul 15, 2016 6:31 pm
Forum: General / Traction Control Manager Software
Topic: ELD input
Replies: 4
Views: 10324

Re: ELD input

Thank you.
by Yungone501
Thu Jul 14, 2016 8:11 pm
Forum: General / Traction Control Manager Software
Topic: ELD input
Replies: 4
Views: 10324

Re: ELD input

You must purchase traction control to be able to use it. If you try without purchasing it, you will only cause problems for yourself. I'm running FlashPro for the 07 TL-S and need some sort of method to give me some pretty gnarly ignition retard for an anti lag setup I plan on using. I have an AEM ...
by Yungone501
Thu Jul 14, 2016 8:04 pm
Forum: TL 2007-2008
Topic: Top speed limiter
Replies: 17
Views: 22332

Re: Top speed limiter

What MAP sensor are you using? Alright, I've got the 4 bar Hondata MAP and due to the question you asked, I just went to your parts page and read up on it on the side note below the sensors description. I'm assuming this is because the sensors resolution isn't compatible with the TL's ecu or what i...
by Yungone501
Wed Jul 13, 2016 11:41 pm
Forum: General / Traction Control Manager Software
Topic: ELD input
Replies: 4
Views: 10324

ELD input

Wanted to know if the ELD pin can be used with the traction control settings in FlashPro WITHOUT having a traction control system? In other words, does FlashPro require the Traction Control to be purchased and installed to enable the settings in the calibration?

Thanks.