Search found 7 matches
- Sun Sep 08, 2019 10:40 pm
- Forum: s300 / SManager
- Topic: Closed Loop Malfunction
- Replies: 45
- Views: 23937
Re: Closed Loop Malfunction
Sorry for the delay. Its an old calibration and log but it still does it with my current cal which is much better fuelling-wise. I havent had much time to look at it but thinking to turn off fuel cut or alter the delay time and also look at some closed loop settings tps and max min adjustment. If yo...
- Sat Aug 17, 2019 6:34 am
- Forum: s300 / SManager
- Topic: Closed Loop Malfunction
- Replies: 45
- Views: 23937
Re: Closed Loop Malfunction
I also have this issue. I have a S300 V1 using the latest beta software. 2.7.3.0. On a P28 ecu. Mine happens after/during a tip-out. After throttle tip out i have tps of 0% so CL turns off. Then as i change up a gear also during 0% throttle, CL turns on for a short time (0.9seconds) but no fuel inje...
- Thu Oct 16, 2014 11:10 am
- Forum: K-Pro / KManager
- Topic: kpro S1 wideband not working,batt voltage between pins A1A24
- Replies: 7
- Views: 2281
Re: kpro S1 wideband not working,batt voltage between pins A
does the lambda heater relay have to be a solid state relay or can it be a std relay? I used the std relay pack main, fuel and what I think is the lambda relay from a dc5 integra.
- Wed Oct 15, 2014 2:54 pm
- Forum: K-Pro / KManager
- Topic: kpro S1 wideband not working,batt voltage between pins A1A24
- Replies: 7
- Views: 2281
Re: kpro S1 wideband not working,batt voltage between pins A
No but I could send it to a friend to test who has a k pro car. I will try that first.
- Wed Oct 15, 2014 12:59 pm
- Forum: K-Pro / KManager
- Topic: kpro S1 wideband not working,batt voltage between pins A1A24
- Replies: 7
- Views: 2281
Re: kpro S1 wideband not working,batt voltage between pins A
great, its hardly been used and all wired correctly. What are my options?
- Wed Oct 15, 2014 11:48 am
- Forum: K-Pro / KManager
- Topic: kpro S1 wideband not working,batt voltage between pins A1A24
- Replies: 7
- Views: 2281
Re: kpro S1 wideband not working,batt voltage between pins A
37820 PRB A06
2068-000025
2068-000025
- Sun Oct 12, 2014 9:03 am
- Forum: K-Pro / KManager
- Topic: kpro S1 wideband not working,batt voltage between pins A1A24
- Replies: 7
- Views: 2281
kpro S1 wideband not working,batt voltage between pins A1A24
The wideband is wired in as per the hondata wiring for k20. I get a sensor heater wiring malfunction DTC P1166. I checked the service manual and the first thing it says to do is check voltage between A1 and A24 and if there is battery voltage then a new ecu is needed? I have battery voltage but sure...