Hondata

Sorry for the delay. Its an old calibration and log but it still does it with my current cal which is much better fuelling-wise. I havent had much time to look at it but thinking to turn off fuel cut or alter the delay time and also look at some closed loop settings tps and max min adjustment. If yo...

I also have this issue. I have a S300 V1 using the latest beta software. 2.7.3.0. On a P28 ecu. Mine happens after/during a tip-out. After throttle tip out i have tps of 0% so CL turns off. Then as i change up a gear also during 0% throttle, CL turns on for a short time (0.9seconds) but no fuel inje...

does the lambda heater relay have to be a solid state relay or can it be a std relay? I used the std relay pack main, fuel and what I think is the lambda relay from a dc5 integra.

No but I could send it to a friend to test who has a k pro car. I will try that first.

great, its hardly been used and all wired correctly. What are my options?

37820 PRB A06
2068-000025

The wideband is wired in as per the hondata wiring for k20. I get a sensor heater wiring malfunction DTC P1166. I checked the service manual and the first thing it says to do is check voltage between A1 and A24 and if there is battery voltage then a new ecu is needed? I have battery voltage but sure...