Search found 15 matches
- Thu Feb 09, 2017 4:54 pm
- Forum: TSX 2004-2014
- Topic: Full throttle Shifting for TSX
- Replies: 31
- Views: 41768
Re: Full throttle Shifting for TSX
Hey Guys, do you have to try this, to compensate/eliminate this jerky issue: https://www.hondata.com/help/flashpro/index.html?tuning_for_vtc.htm I have made this on my FN2 s/c and it runs very nice! :) Like this: vtc.JPG This is what we were trying to get Hondata to add for us... and thankfully we ...
- Thu Oct 27, 2016 10:08 am
- Forum: TSX 2004-2014
- Topic: Full throttle Shifting for TSX
- Replies: 31
- Views: 41768
Re: Full throttle Shifting for TSX
bump.... my grandma's neck is hurting now from the jerky shifts! Every time I take her to her appointments I feel like her neck is going to snap. She continually asks me: -"Why isn't your high angle cam locking during shifts?" -- "idk grandma, Hondata won't answer..." -"Well...
- Tue Sep 27, 2016 6:08 am
- Forum: TSX 2004-2014
- Topic: Full throttle Shifting for TSX
- Replies: 31
- Views: 41768
Re: Full throttle Shifting for TSX
bump, my wife is now requesting to have this feature added.
- Wed Sep 21, 2016 6:31 am
- Forum: TSX 2004-2014
- Topic: Full throttle Shifting for TSX
- Replies: 31
- Views: 41768
Re: Full throttle Shifting for TSX
bump, still having jerky shifts
- Tue Sep 06, 2016 9:52 am
- Forum: TSX 2004-2014
- Topic: Full throttle Shifting for TSX
- Replies: 31
- Views: 41768
Re: Full throttle Shifting for TSX
Is there any update on the status of this?
- Tue Aug 23, 2016 3:07 pm
- Forum: TSX 2004-2014
- Topic: Full throttle Shifting for TSX
- Replies: 31
- Views: 41768
Full throttle Shifting for TSX
Is it possible to add full throttle shifting functionality for 09+ TSX. I know a lot of us would benefit greatly from this, along with the function to lock high angle CAM during shifting, so we don't go back to 0 causing jerky shifts.
- Thu Aug 18, 2016 9:52 am
- Forum: TSX 2004-2014
- Topic: injector recovery help
- Replies: 15
- Views: 8629
Re: injector recovery help
Thank you for taking the time to hear our concern, we understand that supporting so many platforms is difficult. We appreciate the helpfulness Hondata has always provide! :)
Im looking forward to some smooth shifting!!!
Im looking forward to some smooth shifting!!!
- Thu Aug 18, 2016 5:34 am
- Forum: TSX 2004-2014
- Topic: injector recovery help
- Replies: 15
- Views: 8629
Re: injector recovery help
I have the exact same symptoms with my supercharger setup. The dip/power loss even after stepping on the throttle creates a VERY jerky shift. VitViper also tuned my vehicle and fueling for 0,15,30deg.. Can we please get the option to have VTC locked at high deg like the civics have? It's nearly impo...
- Sat Oct 31, 2015 1:45 pm
- Forum: TSX 2004-2014
- Topic: 2011 TSX MT Flashpro Rev Hang
- Replies: 9
- Views: 8698
Re: 2011 TSX MT Flashpro Rev Hang
Can the "Overrun throttle opening" also be added to 2009/2010 TSX? Option is only available for 2011+ at the moment
- Wed Oct 01, 2014 4:14 pm
- Forum: TSX 2004-2014
- Topic: Anyone successfully recording Wideband voltage on Flashpro?
- Replies: 7
- Views: 5580
Re: Anyone successfully recording Wideband voltage on Flashp
Great, thank you for providing that information. If you could also provide a pinout diagram that would be awesome. OR if you could just tell me which page in the service manual has this information because I probably spent 2 hours pouring over both Engine and body electrical sections and could not f...
- Tue Sep 30, 2014 7:57 pm
- Forum: TSX 2004-2014
- Topic: Anyone successfully recording Wideband voltage on Flashpro?
- Replies: 7
- Views: 5580
Re: Anyone successfully recording Wideband voltage on Flashp
Ok So I have been trying to find a Pin out for which connector/pin I need to use for my wideband and I am honestly really lost. ELD shows as terminal A in the fuse box located in my Engine bay, but this is just the fuse for ELD correct? I should be looking on ECM/PCM (also located in the engine bay)...
- Mon Sep 22, 2014 12:01 pm
- Forum: TSX 2004-2014
- Topic: Anyone successfully recording Wideband voltage on Flashpro?
- Replies: 7
- Views: 5580
Re: Anyone successfully recording Wideband voltage on Flashp
So I have to disable ELD via flashpro? Or just select ELD as my wideband input and remove the factory pin and put my wideband wire in there. What about ground? Also, with ELD disabled, won't my alternator charge the battery differently since the car doesn't know how much power is being drawn?? IDK j...
- Sun Sep 21, 2014 11:16 am
- Forum: TSX 2004-2014
- Topic: Anyone successfully recording Wideband voltage on Flashpro?
- Replies: 7
- Views: 5580
Anyone successfully recording Wideband voltage on Flashpro?
I know there is an option to record wideband input from an existing harness.. i.e SO2, EGRL, ECT2, ELD. My plan was to hook up my prosport EVO wideband to the S02 since thats the bung Im going to be installing my wideband sensor in, but it looks like we only have the option to select ELD-Electrical ...
- Tue Jan 29, 2013 4:37 pm
- Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
- Topic: 09-10 US TSX MT (stock) Calibration
- Replies: 2
- Views: 3000
Re: 09-10 US TSX MT (stock) Calibration
No, you cannot use a calibration from the SI or ILX as they use a different ECU and the code they use is different. The forum will be updated shortly. Alright thanks, I was planning on manually tuning, but that is a massive undertaking that I am not ready for (even with all of the guides on here). ...
- Mon Jan 28, 2013 7:50 pm
- Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
- Topic: 09-10 US TSX MT (stock) Calibration
- Replies: 2
- Views: 3000
09-10 US TSX MT (stock) Calibration
Has anyone made any base tunes for the 09 TSX k24z3? I know the 2012si got our engine, possibly use same calibration for my TSX? I guess I'm the front runner for the Acura crowd. Just trying to feel everything out and see where I need to start and make progress from there. P.S- Are we gunna get our ...