Hondata

if these are too short just buy another pins in radio shack shop and solder to wires ;) It shouldn't be too short though, all Hondata Adapter cables should be made equally :S This might be too much to ask but could someone take a comparison photo of the DLC(OBD2) end Hondata Red and White against t...

* I think colors can differ * Same as in instructions, you must relocate your DLC pin 14 to 1 pin, add to DLC 6 -white and DLC 14 - red. * just compare OEM connectors from DLC, they are same lenght as yours from Hondata harness ? Well I took out the White and Red wires today and compared them with ...

Spunkster wrote:Did you put the larger or the smaller pins into the OBD2 diagnostic port?

Each end of the cable was labeled with where they should go; "CAN" or "DLC(OBD2)"

same problem bro i take the car with rbb a21 to dealer and he can t pair the unit with the immobilizer. And when i connect my flashpro it said flashpro is connected but need to turn on vehicule (state before motor running) else i'm at that key position. DOn t know why and i ve follow hondata instru...

apologies for the insanely large photos :S

Just want to ask a few questions regarding my issue to see if anyone else has come across it and can shed some light: *The colour of my CAN connector is blue and the one on the Hondata instructions says its meant to be green, does it matter? (99.9% sure its the CAN connector, according to http://hon...