Search found 343 matches
- Thu Jan 18, 2024 12:36 pm
- Forum: FlashPro Calibrations
- Topic: 2011 CR-Z HKS GT2 + injectors basemap
- Replies: 52
- Views: 5402
Re: 2011 CR-Z HKS GT2 + injectors basemap
Hi France, At the moment it running super lean in closed loop operations. Closed Loop operations: (low to mid throttle) If you are using fuel tables, you must add fuel in all cells until the STRIM values are near to zero in all conditions. Open Loop: (Full throttle) I recommend to be on lambda 0.81 ...
- Thu Oct 19, 2023 12:53 am
- Forum: Civic Type R 2007-2011 European FN2
- Topic: How to fix "dip idle, stalling" on FN2 K20Z4 engine
- Replies: 0
- Views: 78731
How to fix "dip idle, stalling" on FN2 K20Z4 engine
Hi all, the common annoying issue on modified K20Z4 after reflash is, dipping of the rev till engine stall. > Big question how to fix this? --------------- Step 1: Apply air leak test to find all issues and solve it first. ---------------- Step 2: > check sensors, connectors etc. - Seals: > throttle...
- Thu Oct 19, 2023 12:25 am
- Forum: FlashPro Calibrations
- Topic: Injectors cut on shift - High revs
- Replies: 16
- Views: 5411
Re: Injectors cut on shift - High revs
Hi Wal, yes you must deal in: Throttle flow vs. opening https://k-tuned.3dcartstores.com/72mm-Drive-By-Wire-Throttle-Body_p_878.html (direct k-tuned TB guideline download- https://drive.google.com/file/d/141lSSusKHTHyzfFS5jrnDyUBijCOg_8s/view?pli=1 ) To avoid injector shutoff during shifting events ...
- Mon Apr 12, 2021 6:00 am
- Forum: FlashPro Manager
- Topic: This is not the vehicle the flashpro was locked to
- Replies: 4
- Views: 3716
Re: This is not the vehicle the flashpro was locked to
He will try it to send the feedback again with connected OBD2 and ignition on.
- Fri Apr 09, 2021 4:38 am
- Forum: FlashPro Manager
- Topic: This is not the vehicle the flashpro was locked to
- Replies: 4
- Views: 3716
Re: This is not the vehicle the flashpro was locked to
Of course - the notebook is not be able to be connected to the internet. No WLAN at the garage.
Which solution can you provide to fix this? Customer start to make pressure to fix this problem... Car need to be updated for raceing.
- Thu Apr 08, 2021 10:50 am
- Forum: FlashPro Manager
- Topic: This is not the vehicle the flashpro was locked to
- Replies: 4
- Views: 3716
This is not the vehicle the flashpro was locked to
After firmware upgrade the customers flashpro is not be able to upload my new calibrations to the flashpro box to update the ECU map. WhatsApp Image 2021-04-06 at 8.11.23 PM.jpeg WhatsApp Image 2021-04-06 at 8.11.14 PM.jpeg WhatsApp Image 2021-04-06 at 8.11.08 PM.jpeg Issue was also send via feedback.
- Thu Apr 08, 2021 10:38 am
- Forum: Civic Type R 2007-2011 European FN2
- Topic: Base map/ calbiration for k20z4/k24a3 frank build
- Replies: 4
- Views: 10056
Re: Base map/ calbiration for k20z4/k24a3 frank build
I only tuned the car - not fitted the hardware.
- Mon Jan 18, 2021 6:16 am
- Forum: Civic Type R 2007-2011 European FN2
- Topic: Decat Tune
- Replies: 2
- Views: 7338
Re: Decat Tune
So i'm going to soon be decatting my car, i.e using a 4-2-1 exhaust manifold without catalytic converter (Tegiwa for reference). I currently have a 2.5" catback (J's Racing 60RS System) and large bore CAI kit (CPL Racing). If I use the Group N tune as a base tune, will this cause issues? Or do...
- Sun Dec 13, 2020 11:59 pm
- Forum: s300 / SManager
- Topic: Knock Sensor - tuning IGN advance
- Replies: 2
- Views: 2930
Re: Knock Sensor - tuning IGN advance
Ok, thanks DaX for the information.
- Sun Dec 13, 2020 2:55 pm
- Forum: s300 / SManager
- Topic: Knock Sensor - tuning IGN advance
- Replies: 2
- Views: 2930
Knock Sensor - tuning IGN advance
Hi, i am little bit confused regarding how to find the best IGN advance for the b series engine. How I can monitor the knock Sensor? K count is not available on the board. It is required to use a third party knock tool to identify knocking? I have one customer request for tuning but I have no idea h...
- Thu Oct 15, 2020 3:35 am
- Forum: Civic Type R 2007-2011 European FN2
- Topic: need help k count hight
- Replies: 20
- Views: 17503
Re: need help k count hight
hybrid calibration? I do not understand .what if I would like to be able to have a suitable calibration for my car I have an invidia exhaust and kyn intake Sorry need one calibration for my car use fuel table by select "use speed/density (MAP) fuel tables" and enter the value of map press...
- Tue Oct 13, 2020 1:43 pm
- Forum: FlashPro Manager
- Topic: FlashProManager V3.6.5.0
- Replies: 17
- Views: 15127
Re: FlashProManager V3.6.5.0
On my Flashpro the firmware update for this beta was successful.
- Tue Oct 13, 2020 1:42 pm
- Forum: FlashPro Manager
- Topic: FlashProManager V3.6.5.0
- Replies: 17
- Views: 15127
- Thu Oct 08, 2020 4:18 am
- Forum: Civic Type R 2007-2011 European FN2
- Topic: General question K20 - popping/crackle noise for a "sport mode" possible?
- Replies: 25
- Views: 46496
Re: General question K20 - popping/crackle noise for a "sport mode" possible?
Yes... Figured out now... Option must be configured as follow 1. Menu: "Fuel" > "Overrun fuel cut delay" ... Timing must be rise up to 100-120 ms on all gears 2. retard igntion in your IGN table to -10 (as low as possible) at shifiting area. > Col 1 and 2 from 3000 rpm till end o...
- Thu Oct 08, 2020 4:06 am
- Forum: FlashPro Manager
- Topic: FlashPro Requests
- Replies: 367
- Views: 499772
Re: FlashPro Requests
Contact the team via email: support@hondata.com