Search found 343 matches

by typer86
Thu Jan 18, 2024 12:36 pm
Forum: FlashPro Calibrations
Topic: 2011 CR-Z HKS GT2 + injectors basemap
Replies: 52
Views: 2771

Re: 2011 CR-Z HKS GT2 + injectors basemap

Hi France, At the moment it running super lean in closed loop operations. Closed Loop operations: (low to mid throttle) If you are using fuel tables, you must add fuel in all cells until the STRIM values are near to zero in all conditions. Open Loop: (Full throttle) I recommend to be on lambda 0.81 ...
by typer86
Thu Oct 19, 2023 12:53 am
Forum: Civic Type R 2007-2011 European FN2
Topic: How to fix "dip idle, stalling" on FN2 K20Z4 engine
Replies: 0
Views: 60816

How to fix "dip idle, stalling" on FN2 K20Z4 engine

Hi all, the common annoying issue on modified K20Z4 after reflash is, dipping of the rev till engine stall. > Big question how to fix this? --------------- Step 1: Apply air leak test to find all issues and solve it first. ---------------- Step 2: > check sensors, connectors etc. - Seals: > throttle...
by typer86
Thu Oct 19, 2023 12:25 am
Forum: FlashPro Calibrations
Topic: Injectors cut on shift - High revs
Replies: 16
Views: 4043

Re: Injectors cut on shift - High revs

Hi Wal, yes you must deal in: Throttle flow vs. opening https://k-tuned.3dcartstores.com/72mm-Drive-By-Wire-Throttle-Body_p_878.html (direct k-tuned TB guideline download- https://drive.google.com/file/d/141lSSusKHTHyzfFS5jrnDyUBijCOg_8s/view?pli=1 ) To avoid injector shutoff during shifting events ...
by typer86
Mon Apr 12, 2021 6:00 am
Forum: FlashPro Manager
Topic: This is not the vehicle the flashpro was locked to
Replies: 4
Views: 3129

Re: This is not the vehicle the flashpro was locked to

He will try it to send the feedback again with connected OBD2 and ignition on.
by typer86
Fri Apr 09, 2021 4:38 am
Forum: FlashPro Manager
Topic: This is not the vehicle the flashpro was locked to
Replies: 4
Views: 3129

Re: This is not the vehicle the flashpro was locked to

Spunkster wrote: Thu Apr 08, 2021 11:11 am Feedback was sent with the OBD2 port disconnected.
Of course - the notebook is not be able to be connected to the internet. No WLAN at the garage.
Which solution can you provide to fix this? Customer start to make pressure to fix this problem... Car need to be updated for raceing.
by typer86
Thu Apr 08, 2021 10:50 am
Forum: FlashPro Manager
Topic: This is not the vehicle the flashpro was locked to
Replies: 4
Views: 3129

This is not the vehicle the flashpro was locked to

After firmware upgrade the customers flashpro is not be able to upload my new calibrations to the flashpro box to update the ECU map. WhatsApp Image 2021-04-06 at 8.11.23 PM.jpeg WhatsApp Image 2021-04-06 at 8.11.14 PM.jpeg WhatsApp Image 2021-04-06 at 8.11.08 PM.jpeg Issue was also send via feedback.
by typer86
Thu Apr 08, 2021 10:38 am
Forum: Civic Type R 2007-2011 European FN2
Topic: Base map/ calbiration for k20z4/k24a3 frank build
Replies: 4
Views: 9754

Re: Base map/ calbiration for k20z4/k24a3 frank build

I only tuned the car - not fitted the hardware.
by typer86
Mon Jan 18, 2021 6:16 am
Forum: Civic Type R 2007-2011 European FN2
Topic: Decat Tune
Replies: 2
Views: 7049

Re: Decat Tune

So i'm going to soon be decatting my car, i.e using a 4-2-1 exhaust manifold without catalytic converter (Tegiwa for reference). I currently have a 2.5" catback (J's Racing 60RS System) and large bore CAI kit (CPL Racing). If I use the Group N tune as a base tune, will this cause issues? Or do...
by typer86
Sun Dec 13, 2020 11:59 pm
Forum: s300 / SManager
Topic: Knock Sensor - tuning IGN advance
Replies: 2
Views: 2605

Re: Knock Sensor - tuning IGN advance

Ok, thanks DaX for the information.
by typer86
Sun Dec 13, 2020 2:55 pm
Forum: s300 / SManager
Topic: Knock Sensor - tuning IGN advance
Replies: 2
Views: 2605

Knock Sensor - tuning IGN advance

Hi, i am little bit confused regarding how to find the best IGN advance for the b series engine. How I can monitor the knock Sensor? K count is not available on the board. It is required to use a third party knock tool to identify knocking? I have one customer request for tuning but I have no idea h...
by typer86
Thu Oct 15, 2020 3:35 am
Forum: Civic Type R 2007-2011 European FN2
Topic: need help k count hight
Replies: 20
Views: 16362

Re: need help k count hight

hybrid calibration? I do not understand .what if I would like to be able to have a suitable calibration for my car I have an invidia exhaust and kyn intake Sorry need one calibration for my car use fuel table by select "use speed/density (MAP) fuel tables" and enter the value of map press...
by typer86
Tue Oct 13, 2020 1:43 pm
Forum: FlashPro Manager
Topic: FlashProManager V3.6.5.0
Replies: 17
Views: 13463

Re: FlashProManager V3.6.5.0

On my Flashpro the firmware update for this beta was successful.
by typer86
Tue Oct 13, 2020 1:42 pm
Forum: FlashPro Manager
Topic: FlashProManager V3.6.5.0
Replies: 17
Views: 13463

Re: FlashProManager V3.6.5.0

Hondata wrote: Thu Oct 08, 2020 8:09 am How do we know who the customer is?
I have dropped all information via email to you. Customer is informed to perfom the feedback...
by typer86
Thu Oct 08, 2020 4:18 am
Forum: Civic Type R 2007-2011 European FN2
Topic: General question K20 - popping/crackle noise for a "sport mode" possible?
Replies: 25
Views: 42539

Re: General question K20 - popping/crackle noise for a "sport mode" possible?

Yes... Figured out now... Option must be configured as follow 1. Menu: "Fuel" > "Overrun fuel cut delay" ... Timing must be rise up to 100-120 ms on all gears 2. retard igntion in your IGN table to -10 (as low as possible) at shifiting area. > Col 1 and 2 from 3000 rpm till end o...
by typer86
Thu Oct 08, 2020 4:06 am
Forum: FlashPro Manager
Topic: FlashPro Requests
Replies: 364
Views: 426844

Re: FlashPro Requests

Contact the team via email: support@hondata.com