Search found 12 matches
- Fri Apr 17, 2015 2:51 pm
- Forum: K-Pro / KManager
- Topic: Dropping Alternator Charge Voltage - ELD Enable/Disable
- Replies: 26
- Views: 55475
Re: Dropping Alternator Charge Voltage - ELD Enable/Disable
Charge harness was self made. Oem gauge. Any recommendations? I have seen same issue in about 3 k swapped civics/integra.
- Tue Apr 14, 2015 8:07 pm
- Forum: K-Pro / KManager
- Topic: Dropping Alternator Charge Voltage - ELD Enable/Disable
- Replies: 26
- Views: 55475
Re: Dropping Alternator Charge Voltage - ELD Enable/Disable
Any update to this? I also have a dropping charge voltage from 6000-redline on a k20a2 swapped eg civic. Idle is fine and low rpm driving is stable and high (13.9), but under heavy accel, voltage drops tp 12.9-13.1. Any help would be appreciated
- Wed Nov 07, 2012 10:40 am
- Forum: s300 / SManager
- Topic: PWM question
- Replies: 9
- Views: 2646
Re: PWM question
31 hz is right around where the hondata mac solenoids function well at. Gm solenoids like the higher frequencies. If you have the hondata /mac solenoid, tyr 31hz and report back here.
- Wed Oct 10, 2012 9:30 am
- Forum: s300 / SManager
- Topic: PWM components installed but pwm not working
- Replies: 8
- Views: 4734
Re: PWM components installed but pwm not working
UPDATE: Ok I have made progress. I was unable to get the software to trigger pwm with key on engine off. I made a comment in a1320's post on ht http://honda-tech.com/showthread.php?t=3094827 and xenocron made a suggestion. He put forward maybe there's a rpm minimum limit involved with the pwm trigge...
- Sun Oct 07, 2012 5:46 am
- Forum: s300 / SManager
- Topic: PWM components installed but pwm not working
- Replies: 8
- Views: 4734
Re: PWM components installed but pwm not working
same problem from this user.
http://honda-tech.com/showthread.php?t=3060586
Except I'm using the recommended solenoid, which is of no consequence. Can't get to the bottom of this at all.
http://honda-tech.com/showthread.php?t=3060586
Except I'm using the recommended solenoid, which is of no consequence. Can't get to the bottom of this at all.
- Fri Oct 05, 2012 5:26 pm
- Forum: s300 / SManager
- Topic: PWM components installed but pwm not working
- Replies: 8
- Views: 4734
Re: PWM components installed but pwm not working
can anyone give me a sure way to activate the pwm in parameters using sure numbers in the activation psi field? Here are two screenshots with engine off and engine idling. All calibrations were saved and uploaded. http://farm9.staticflickr.com/8461/8058073964_42f66804d1.jpg s300idle by shanebadoo , ...
- Fri Oct 05, 2012 4:32 pm
- Forum: s300 / SManager
- Topic: PWM components installed but pwm not working
- Replies: 8
- Views: 4734
Re: PWM components installed but pwm not working
will go outside and try now.
- Fri Oct 05, 2012 4:14 pm
- Forum: s300 / SManager
- Topic: PWM components installed but pwm not working
- Replies: 8
- Views: 4734
Re: PWM components installed but pwm not working
ok spunkster. I have tried recommended parameters from locash to get the pwm to datalog with the key on engine off that I can hear the solenoid. I have been unable to do this. In the parameters under boost control, I cannot set activation pressure low enough that it comes on with the engine off. I h...
- Fri Oct 05, 2012 3:37 pm
- Forum: s300 / SManager
- Topic: PWM components installed but pwm not working
- Replies: 8
- Views: 4734
PWM components installed but pwm not working
Asking for help from those good with the ecu circuitry. First off let me say that the I have never gotten the pwm components to work in this ecu although they are installed correctly. What I want to know is if my ecu is missing additional components that is preventing the pwm components from working...
- Wed Oct 03, 2012 11:40 am
- Forum: s300 / SManager
- Topic: S300 runs the car but I cannot connect
- Replies: 3
- Views: 1725
Re: S300 runs the car but I cannot connect
UPDATE: Problem seems to have solved itself. I went with the camera getting ready to take pics to post on here. The d2 green led was solid on key on as was the r1 on the corner of the s300 board. I took the blower tool from the air compressor and decided to give one last blowout. Cleaned all connect...
- Tue Oct 02, 2012 5:00 pm
- Forum: s300 / SManager
- Topic: S300 runs the car but I cannot connect
- Replies: 3
- Views: 1725
Re: S300 runs the car but I cannot connect
Damn spunkster, that was fast. I'm at work now, I'll post more relevant information when I get home.
- Tue Oct 02, 2012 4:39 pm
- Forum: s300 / SManager
- Topic: S300 runs the car but I cannot connect
- Replies: 3
- Views: 1725
S300 runs the car but I cannot connect
Hello, though this is my first post here, I had a s300 for about two years. It worked fine and I was able to upload/datalog and tune. I tried to connect for the first time in 4 months and was unable to connect. When I plug it in to the usb port, it is not even making the usual usb sound when somethi...