Search found 12 matches

by shanebadoo
Fri Apr 17, 2015 2:51 pm
Forum: K-Pro / KManager
Topic: Dropping Alternator Charge Voltage - ELD Enable/Disable
Replies: 26
Views: 55022

Re: Dropping Alternator Charge Voltage - ELD Enable/Disable

Charge harness was self made. Oem gauge. Any recommendations? I have seen same issue in about 3 k swapped civics/integra.
by shanebadoo
Tue Apr 14, 2015 8:07 pm
Forum: K-Pro / KManager
Topic: Dropping Alternator Charge Voltage - ELD Enable/Disable
Replies: 26
Views: 55022

Re: Dropping Alternator Charge Voltage - ELD Enable/Disable

Any update to this? I also have a dropping charge voltage from 6000-redline on a k20a2 swapped eg civic. Idle is fine and low rpm driving is stable and high (13.9), but under heavy accel, voltage drops tp 12.9-13.1. Any help would be appreciated
by shanebadoo
Wed Nov 07, 2012 10:40 am
Forum: s300 / SManager
Topic: PWM question
Replies: 9
Views: 2599

Re: PWM question

31 hz is right around where the hondata mac solenoids function well at. Gm solenoids like the higher frequencies. If you have the hondata /mac solenoid, tyr 31hz and report back here.
by shanebadoo
Wed Oct 10, 2012 9:30 am
Forum: s300 / SManager
Topic: PWM components installed but pwm not working
Replies: 8
Views: 4707

Re: PWM components installed but pwm not working

UPDATE: Ok I have made progress. I was unable to get the software to trigger pwm with key on engine off. I made a comment in a1320's post on ht http://honda-tech.com/showthread.php?t=3094827 and xenocron made a suggestion. He put forward maybe there's a rpm minimum limit involved with the pwm trigge...
by shanebadoo
Sun Oct 07, 2012 5:46 am
Forum: s300 / SManager
Topic: PWM components installed but pwm not working
Replies: 8
Views: 4707

Re: PWM components installed but pwm not working

same problem from this user.

http://honda-tech.com/showthread.php?t=3060586

Except I'm using the recommended solenoid, which is of no consequence. Can't get to the bottom of this at all.
by shanebadoo
Fri Oct 05, 2012 5:26 pm
Forum: s300 / SManager
Topic: PWM components installed but pwm not working
Replies: 8
Views: 4707

Re: PWM components installed but pwm not working

can anyone give me a sure way to activate the pwm in parameters using sure numbers in the activation psi field? Here are two screenshots with engine off and engine idling. All calibrations were saved and uploaded. http://farm9.staticflickr.com/8461/8058073964_42f66804d1.jpg s300idle by shanebadoo , ...
by shanebadoo
Fri Oct 05, 2012 4:32 pm
Forum: s300 / SManager
Topic: PWM components installed but pwm not working
Replies: 8
Views: 4707

Re: PWM components installed but pwm not working

will go outside and try now.
by shanebadoo
Fri Oct 05, 2012 4:14 pm
Forum: s300 / SManager
Topic: PWM components installed but pwm not working
Replies: 8
Views: 4707

Re: PWM components installed but pwm not working

ok spunkster. I have tried recommended parameters from locash to get the pwm to datalog with the key on engine off that I can hear the solenoid. I have been unable to do this. In the parameters under boost control, I cannot set activation pressure low enough that it comes on with the engine off. I h...
by shanebadoo
Fri Oct 05, 2012 3:37 pm
Forum: s300 / SManager
Topic: PWM components installed but pwm not working
Replies: 8
Views: 4707

PWM components installed but pwm not working

Asking for help from those good with the ecu circuitry. First off let me say that the I have never gotten the pwm components to work in this ecu although they are installed correctly. What I want to know is if my ecu is missing additional components that is preventing the pwm components from working...
by shanebadoo
Wed Oct 03, 2012 11:40 am
Forum: s300 / SManager
Topic: S300 runs the car but I cannot connect
Replies: 3
Views: 1708

Re: S300 runs the car but I cannot connect

UPDATE: Problem seems to have solved itself. I went with the camera getting ready to take pics to post on here. The d2 green led was solid on key on as was the r1 on the corner of the s300 board. I took the blower tool from the air compressor and decided to give one last blowout. Cleaned all connect...
by shanebadoo
Tue Oct 02, 2012 5:00 pm
Forum: s300 / SManager
Topic: S300 runs the car but I cannot connect
Replies: 3
Views: 1708

Re: S300 runs the car but I cannot connect

Damn spunkster, that was fast. I'm at work now, I'll post more relevant information when I get home.
by shanebadoo
Tue Oct 02, 2012 4:39 pm
Forum: s300 / SManager
Topic: S300 runs the car but I cannot connect
Replies: 3
Views: 1708

S300 runs the car but I cannot connect

Hello, though this is my first post here, I had a s300 for about two years. It worked fine and I was able to upload/datalog and tune. I tried to connect for the first time in 4 months and was unable to connect. When I plug it in to the usb port, it is not even making the usual usb sound when somethi...