Search found 29 matches

by integra_22t
Fri Jul 13, 2012 8:15 am
Forum: S300 Calibrations
Topic: H22 jrsc, hondata cop, id 1000's, 11.5:1 comp need basemap
Replies: 18
Views: 4981

Re: H22 jrsc, hondata cop, id 1000's, 11.5:1 comp need basem

sorry i cant see your data logs .. they are just strait lines .. the only time ive seen this is when i was having problems with the ecu and hondata not liking each other pull the top cover off the ecu and see if you have 2 green light when you turn the key on if the laptop is conected you will see a...
by integra_22t
Wed Jul 11, 2012 5:40 am
Forum: S300 Calibrations
Topic: H22 jrsc, hondata cop, id 1000's, 11.5:1 comp need basemap
Replies: 18
Views: 4981

Re: H22 jrsc, hondata cop, id 1000's, 11.5:1 comp need basem

open loop for now untill you can see what the car is doing
by integra_22t
Tue Jul 10, 2012 7:46 pm
Forum: S300 Calibrations
Topic: H22 jrsc, hondata cop, id 1000's, 11.5:1 comp need basemap
Replies: 18
Views: 4981

Re: H22 jrsc, hondata cop, id 1000's, 11.5:1 comp need basem

here give this a try it should idle .. maybe not well but you can start tunning it

also start the data log before you start the car so i can see it from the start and post the tune with datalog
by integra_22t
Tue Jul 10, 2012 6:14 am
Forum: S300 Calibrations
Topic: H22 jrsc, hondata cop, id 1000's, 11.5:1 comp need basemap
Replies: 18
Views: 4981

Re: H22 jrsc, hondata cop, id 1000's, 11.5:1 comp need basem

ya start the data log before you try starting it and post it ... also if you plugs have gotten wet from fuel you have to put in a new set as a wet plug will never fire right and you will be chasing the problem also are you running after market coil or a msd box ? if not you might have to close your ...
by integra_22t
Mon Jul 09, 2012 7:49 am
Forum: S300 Calibrations
Topic: H22 jrsc, hondata cop, id 1000's, 11.5:1 comp need basemap
Replies: 18
Views: 4981

Re: H22 jrsc, hondata cop, id 1000's, 11.5:1 comp need basem

post you tune and your data log and ill see if i can help

also make sure your base timming is set

goto online / set timming and set it with a timming light to 16deg
by integra_22t
Fri Jul 06, 2012 8:10 am
Forum: S300 Calibrations
Topic: H22 jrsc, hondata cop, id 1000's, 11.5:1 comp need basemap
Replies: 18
Views: 4981

Re: H22 jrsc, hondata cop, id 1000's, 11.5:1 comp need basem

this should help you get it started

also mak sure you are at 45psi for fuel pressure or have to change your injector dead time

anything i changed i put into your notes
by integra_22t
Thu Jun 07, 2012 12:28 pm
Forum: s100/s200
Topic: s300 hardware problem
Replies: 21
Views: 17144

Re: s300 hardware problem

whent back and chiped the 2nd ecu i was useing .. works fine with the chip .. one green light with the s300 and sent off email
by integra_22t
Thu Jun 07, 2012 10:16 am
Forum: s100/s200
Topic: s300 hardware problem
Replies: 21
Views: 17144

Re: s300 hardware problem

yes i tried it in a bone stock 95 integra b18b and my own 95 integra with an h22 swaped and chiped ecu its not happing when the fan comes on ... that is when the 2nd one stoped working .. now with the 3rd ecu dosent light up d2 at all but works fine with the chip installed .. infact i drove it into ...
by integra_22t
Thu Jun 07, 2012 8:36 am
Forum: s100/s200
Topic: s300 hardware problem
Replies: 21
Views: 17144

Re: s300 hardware problem

well im in to the 3rd ecu now .. a chiped p28 ... removed the ic chip and the ic mount .. installed the male pins for the hondata in to the 24 pin slot (27256 - ic4) and the 4 pins (icn2) into the chiped ecu and removed j12 http://i114.photobucket.com/albums/n263/integra_album/IMG_6023.jpg http://i1...
by integra_22t
Mon Jun 04, 2012 8:15 am
Forum: s100/s200
Topic: s300 hardware problem
Replies: 21
Views: 17144

Re: s300 hardware problem

well started the car and let it sit till the rad fan to come on and 5 min into it the car dies and when it happens my temps go to 302 again and the rpm goes to 52,427

and only one green light again

i dont know what to do at this point :(
by integra_22t
Thu May 31, 2012 2:37 pm
Forum: s100/s200
Topic: s300 hardware problem
Replies: 21
Views: 17144

Re: s300 hardware problem

pulled eveything out and installed into anouther ecu and 2 green lights .. tomorow ill upload the tune and see what happens
by integra_22t
Thu May 31, 2012 11:33 am
Forum: s100/s200
Topic: s300 hardware problem
Replies: 21
Views: 17144

Re: s300 hardware problem

well i cant get any parts for 2 weeks so im pulling eveything out of this ecu and installing into anouther
by integra_22t
Thu May 31, 2012 4:27 am
Forum: s100/s200
Topic: s300 hardware problem
Replies: 21
Views: 17144

Re: s300 hardware problem

the one at d4 is main power

the red one at d3 is for datalog

what does the green led mean at d2 ?

- also tested it in a bone stock integra and still only have 1 green led !
by integra_22t
Wed May 30, 2012 3:43 pm
Forum: s100/s200
Topic: s300 hardware problem
Replies: 21
Views: 17144

Re: s300 hardware problem

yes j12 is cut ive had the car running and datloging it looking into doing anouther ecu and getting the socket checker you have .. do you have part numbers for these or a link i can order from as it took 3 weeks to get the s300 from a some what local supplyer and i want to return the car to the owne...