Search found 13 matches

by newpassport
Sat May 30, 2015 2:51 am
Forum: Civic Si 2006-2011 Americas
Topic: strange vtec
Replies: 3
Views: 2249

Re: strange vtec

I was test it on the lifting.when i was drive it on road.the vetc never on what ever light or deep throttle.
by newpassport
Sat May 30, 2015 2:11 am
Forum: Civic Si 2006-2011 Americas
Topic: strange vtec
Replies: 3
Views: 2249

strange vtec

There is strange vtec.
The vtec setting is lower 2500rpm upper 5000.
Light throttle the vtec on 2500rpm~5000rpm.After 5000 rpm vtec close.
Deep throttle the vtec never on.
No error code.
ecu:37820-rna-a14
you can see datalog and calibration.
by newpassport
Fri May 22, 2015 11:16 pm
Forum: Civic Si 2006-2011 Americas
Topic: 06~11 R18A CIVCI wideband input to tune
Replies: 7
Views: 2158

Re: 06~11 R18A CIVCI wideband input to tune

On the R18 you should be able to use the A23 ECU pin as a wideband input for the aftermarket analog output wire, but the Electronic Load Detector (ELD) must be disabled. http://www.hondata.com/help/flashpro/index.html?ecu_connectors.htm From what I understand, the stock oxygen sensor tracks AFRs fr...
by newpassport
Thu May 21, 2015 8:37 pm
Forum: Civic Si 2006-2011 Americas
Topic: 06~11 R18A CIVCI wideband input to tune
Replies: 7
Views: 2158

Re: 06~11 R18A CIVCI wideband input to tune

Spunkster wrote:Have you read the information at: http://www.hondata.com/help/flashpro/au ... b=autotune
I can stock o2 sensor to autotune.
by newpassport
Wed May 20, 2015 1:22 am
Forum: Civic Si 2006-2011 Americas
Topic: 06~11 R18A CIVCI wideband input to tune
Replies: 7
Views: 2158

06~11 R18A CIVCI wideband input to tune

Hi
My car is 06 R18A CIVIC,How to input wideband to tune the car and close loop.The manager do not have any setting funtion.Should i wring the sensor just like si?
Thanks
by newpassport
Tue Jun 17, 2014 6:41 pm
Forum: Fit 2007-2008
Topic: HONDA NEW FIT L15B FLASHPRO?
Replies: 4
Views: 12062

Re: HONDA NEW FIT L15B FLASHPRO?

Spunkster wrote:There are currently no plans to develop a FlashPro for the newer Fits.
It is very high sales volume in china.A lot of young guy to buy one for race.
I sincerely hope hondata can develop a Flashpro for new fit.
Thanks
by newpassport
Mon Jun 09, 2014 2:00 am
Forum: Fit 2007-2008
Topic: HONDA NEW FIT L15B FLASHPRO?
Replies: 4
Views: 12062

HONDA NEW FIT L15B FLASHPRO?

Does hondata will develop the new flashpro for the new fit L15b ENGINE?
L15B:TWIN CAM
CR:11:5
fuel Direct injection
5mt(6mt in japanese market)
131hp
good for race!
by newpassport
Sun Nov 18, 2012 8:12 am
Forum: K-Pro / KManager
Topic: Daughter Board Communication Error
Replies: 42
Views: 8878

Re: Daughter Board Communication Error

problem fixed.it was the starter wiring problem.
by newpassport
Fri Nov 09, 2012 1:05 am
Forum: K-Pro / KManager
Topic: Daughter Board Communication Error
Replies: 42
Views: 8878

Daughter Board Communication Error

i had set up the kpro3 in my K24 EG
all thing been check.the wring, the battery,the ground and the alternator.the voltage was 13.9v reading in kpro.the battery was 14.1v
some time the error came out when i start the car,some times not,not often.
which will cause this?thanks
by newpassport
Wed Jul 04, 2012 9:02 pm
Forum: K-Pro / KManager
Topic: which input should i use?
Replies: 1
Views: 840

which input should i use?

My ecu is kpro3 for 05~06 rsx
The AFR gauge is innovate MTXL.
Should i use the eld pin or analog input to datalog and display afr?
which is the best?
thanks
by newpassport
Tue May 15, 2012 1:01 am
Forum: K-Pro / KManager
Topic: about the knock control
Replies: 2
Views: 1227

Re: about the knock control

Hondata wrote:That means that maximum power is achieved before the engine knocks. Black line = MBT = max power, red/blue lines = where knock starts.
thanks you.

more advance igniton timing not equal more power.
by newpassport
Fri May 11, 2012 1:56 am
Forum: K-Pro / KManager
Topic: about the knock control
Replies: 2
Views: 1227

about the knock control

why the 'ignition(mbt)' be lower than the 'knock ignition limit' and ' low octane knock limit ignition advance' before 60kpa?thanks