Search found 7 matches
- Sat Mar 24, 2012 7:43 am
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: Does IAT compensation really work?
- Replies: 2
- Views: 4672
Re: Does IAT compensation really work?
Thanks, Hondata. That explains a lot.
- Wed Mar 21, 2012 5:44 pm
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: Does IAT compensation really work?
- Replies: 2
- Views: 4672
Does IAT compensation really work?
Now that it's starting to get hot (here in the eastern US) I have been playing with the IAT Temperature Compensation feature. After a few days of trial and error, I'm not convinced it actually works. Today I did a test - driving to work (about a 1 hour drive in varied traffic). The L.Trim and S.Trim...
- Wed Mar 14, 2012 6:23 pm
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: WOT/Open Loop very rich
- Replies: 3
- Views: 5232
Re: WOT/Open Loop very rich
If the closed loop is ok, but WOT is rich, then you need to change the WOT compensation tables. As stock they are super rich from 6000 rpm upwards. Don't make the WOT compensation table values any leaner than 12.5:1 in columns 8 and above, otherwise the ECU will never run in open loop. That's what ...
- Wed Feb 01, 2012 7:40 pm
- Forum: FlashPro Manager
- Topic: Knock control
- Replies: 4
- Views: 3364
Re: Knock control
(Just responding in the hopes that I might learn something) FYI, on the CR-Z, a K.Control of ~100% is what you get with regular gas (87 Octane US). 93 Octane gives a K.Control of about 66%. On the CR-Z it looks the same on the stock (RTS) tune and Honda's stock tune. As Hondata said, its the ECUs es...
- Wed Jan 04, 2012 6:27 pm
- Forum: FlashPro Manager
- Topic: Editing Indexes Not Working
- Replies: 4
- Views: 2048
Re: Editing Indexes Not Working
... The economy throttle table uses a dynamic calculation to change the throttle plate. So are you saying the actual throttle response in Economy will be adjusted dynamicly from the Economy Throttle table (i.e., the Hondata stock tables will behave like the stock Economy)? That would be great! It j...
- Tue Jan 03, 2012 12:06 am
- Forum: FlashPro Manager
- Topic: Editing Indexes Not Working
- Replies: 4
- Views: 2048
Re: Editing Indexes Not Working
This is not something that is currently available, but we may make changes to this at a later date. OK, thanks for the response. I'm sure this isn't the most important change/fix that could be made. FYI, the reason that I wanted it was twofold. First, I don't like the agressive response on the Spor...
- Sun Dec 25, 2011 8:56 am
- Forum: FlashPro Manager
- Topic: Editing Indexes Not Working
- Replies: 4
- Views: 2048
Editing Indexes Not Working
Editing Indexes doesn't work properly. On the CR-Z configuratons (at least the base one) it doesn work at all for any tables (it is greyed out). On the Civic-R18-RNA-1 configuration, it works for Fuel and Ignition tables but only works for Knock Limit tables and not the others and doesn't work for T...