If you bothered to read the release notes within the new package you will see they fixed cranking fuel.
Hondata always note their changes to a degree.
Search found 21 matches
- Thu Feb 01, 2018 9:29 am
- Forum: FlashPro Manager
- Topic: 2.8.8. Bug - Official Statement
- Replies: 6
- Views: 1964
- Thu Jul 27, 2017 12:03 pm
- Forum: FlashPro Manager
- Topic: FlashProManager 2.7.9.0
- Replies: 21
- Views: 5347
Re: FlashProManager 2.7.9.0
What was the issue ?
Thanks for the quick fix
EDIT. Reflashed and checked, everything seems fine at idle, 4% duty cold dropping to 2-3% as engine comes up on temp.
Thanks again Hondata
Thanks for the quick fix
EDIT. Reflashed and checked, everything seems fine at idle, 4% duty cold dropping to 2-3% as engine comes up on temp.
Thanks again Hondata
- Thu Jul 27, 2017 9:27 am
- Forum: FlashPro Manager
- Topic: FlashProManager 2.7.9.0
- Replies: 21
- Views: 5347
Re: FlashProManager 2.7.9.0
Hondata
Injector duty here is 26% ( stock injectors) , on previous log on older software ( same cal. ) it was 4% at idle
Injector duty here is 26% ( stock injectors) , on previous log on older software ( same cal. ) it was 4% at idle
- Thu Jul 27, 2017 9:19 am
- Forum: Civic Type R 2007-2011 European FN2
- Topic: Group N map vtec point
- Replies: 3
- Views: 3516
Re: Group N map vtec point
T22ndy If you open your calibration and find the VTEC tab, you will see window pressure settings . Try 2000rpm 1.0 bar 3000 0.98 bar 4500 0.9 bar 6000 0.9 bar 7200 0.9 bar, It basically means you have to push the pedal harder to engage the high cam, no other changes need to be made as you aren't cha...
- Thu Jul 27, 2017 8:27 am
- Forum: FlashPro Manager
- Topic: FlashProManager 2.7.9.0
- Replies: 21
- Views: 5347
Re: FlashProManager 2.7.9.0
Datalog attached
https://www.dropbox.com/s/qchaiyopdt8hf ... .fpdl?dl=0
Super rich on start up, as previously stated car was perfect prior to this, no hardware or software changes since initially calibrated
https://www.dropbox.com/s/qchaiyopdt8hf ... .fpdl?dl=0
Super rich on start up, as previously stated car was perfect prior to this, no hardware or software changes since initially calibrated
- Thu Jul 27, 2017 8:08 am
- Forum: FlashPro Manager
- Topic: FlashProManager 2.7.9.0
- Replies: 21
- Views: 5347
Re: FlashProManager 2.7.9.0
Just updated to this version, I was getting a random hesitation on my previous flash at 6k that felt like the flat shift was cutting in, so updated FP version, and the cal and switched the flat shift off. Car barely started, chugged and ran so rich the smoke was belching out 2008 fn2 UK FP si-int-21...
- Sun Dec 18, 2016 11:14 am
- Forum: FlashPro Manager
- Topic: Unable to save datalogs after 2.5.1.0 beta update
- Replies: 3
- Views: 1816
Re: Unable to save datalogs after 2.5.1.0 beta update
Hi Hondata
Still unable to save logs on latest software 2.5.4
pressing datalog on FP unit makes the LED flash etc as normal during logs, press again to stop the log and LED stops blinking as normal.
But no log is saved. Have not tried via laptop when driving only standalone with FP
Still unable to save logs on latest software 2.5.4
pressing datalog on FP unit makes the LED flash etc as normal during logs, press again to stop the log and LED stops blinking as normal.
But no log is saved. Have not tried via laptop when driving only standalone with FP
- Sat Aug 20, 2016 1:32 pm
- Forum: FlashPro Manager
- Topic: 2 small issues with FPM 2.4.8.0.
- Replies: 4
- Views: 2077
Re: 2 small issues with FPM 2.4.8.0.
Thanks Hondata
I'll try 2.4.9.0 and report back
Stephen
I'll try 2.4.9.0 and report back
Stephen
- Sun Aug 14, 2016 3:35 pm
- Forum: FlashPro Manager
- Topic: 2 small issues with FPM 2.4.8.0.
- Replies: 4
- Views: 2077
Re: 2 small issues with FPM 2.4.8.0.
Hi Hondata Not sure I follow you on what you need re. point 1 . Basically the live view on the rev meter does the opposite of what you would expect it to do when you go from steady throttle to WOT ( car tip in enrichens then leans out ) instead of rev meter going from 4700 rpm to 1000 rpm it goes to...
- Mon Aug 08, 2016 12:52 pm
- Forum: FlashPro Manager
- Topic: 2 small issues with FPM 2.4.8.0.
- Replies: 4
- Views: 2077
2 small issues with FPM 2.4.8.0.
Hi guys First off for the large part the new features are working 100% so good work. The 2 issue I have are : Lambda on the dash when you tip in the actual AFR goes rich as expected but the live display show lean - needle moves to 9=Krpm on cold start the car goes to straight to the launch control r...
- Sun Aug 07, 2016 8:36 am
- Forum: FlashPro Manager
- Topic: FlashPro Requests
- Replies: 365
- Views: 454730
Re: FlashPro Requests
issue with the lambda via dash, when you hold the button and then accelerate, on enrichment on tip in you would expect the needle to fall to show a richer AFR ( 9 ish ;1) however the needle rises to show a leaner AFR then drops back to actual.
- Sat Aug 06, 2016 9:21 am
- Forum: FlashPro Manager
- Topic: FlashPro Requests
- Replies: 365
- Views: 454730
Re: FlashPro Requests
Auto blip on downshift
- Sat Aug 06, 2016 9:19 am
- Forum: FlashPro Manager
- Topic: FlashProManager v2.4.9 Beta
- Replies: 98
- Views: 41952
Re: FlashProManager v2.4.6 Beta
1 issue with the lambda via dash, when you hold the button and then accelerate, on enrichment on tip in you would expect the needle to fall to show a richer AFR ( 9 ish ;1) however the needle rises to show a leaner AFR then drops back to actual.
Can we have auto blip on downshift ?
Can we have auto blip on downshift ?
- Mon Sep 07, 2015 12:54 pm
- Forum: Civic Type R 2007-2011 European FN2
- Topic: Hondata update/ fuel features not working
- Replies: 2
- Views: 2629
Re: Hondata update/ fuel features not working
Do you any suggestions for stock injectors and fuel pressure on an FN2 for feed back to the dash ?
- Sat Sep 05, 2015 10:00 am
- Forum: Civic Type R 2007-2011 European FN2
- Topic: Hondata update/ fuel features not working
- Replies: 2
- Views: 2629
Hondata update/ fuel features not working
My car was tuned a year ago by Vit and everything was working 100%. It is MAP based tune and the AFM has been deleted due to the intake I run. Today to do some logging I had to update my software and FP firmware including a download/upload of the calibration. Since then, the instaneous mpg scale is ...