Would it be possible to add a PWM output option for controlling a brushless fuel pump? The Walbro/TI brushless pump speed can be controlled by PWM, but Kpro only has 1 and I’m using it for a 3 port boost solenoid.
Thank you!
Search found 32 matches
- Thu Feb 24, 2022 5:32 am
- Forum: K-Pro / KManager
- Topic: KPro / KManager requests
- Replies: 146
- Views: 832899
- Mon Sep 20, 2021 7:54 pm
- Forum: K-Pro / KManager
- Topic: Hesitation on acceleration under ECT 160 degrees, analog input sensors for advanced protection
- Replies: 1
- Views: 1842
Hesitation on acceleration under ECT 160 degrees, analog input sensors for advanced protection
- 2001 S2000 - version of software being used 4.4.6.0 - serial number 44667 - the calibration (as an attachment) - a datalog of a problem (as an attachment) - when and where you got the K-Pro: sent kpro2 board in for Kpro 4 upgrade in 2017 Modifications: Turbo, built longblock, mostly untouched OEM ...
- Sat Sep 18, 2021 4:47 am
- Forum: K-Pro / KManager
- Topic: KPro / KManager requests
- Replies: 146
- Views: 832899
Re: KPro / KManager requests
Hi Hondata Not sure if this has been discussed - But, is it possible to put a delay on the O2 correction / short term trim at startup if an external wideband is used? The analog external wideband input is really great and works well. However, with more and more customers running the AEM 30-0300 wid...
- Thu May 07, 2020 7:33 am
- Forum: K-Pro / KManager
- Topic: Kpro4 will not show igintion is on
- Replies: 1
- Views: 2113
Kpro4 will not show igintion is on
- what vehicle you have :2001 S2000 - serial number of your K-Pro 46035 - version of software being used (from Help, About): 4.4.3.0 - ECU part number (starts with 37820) and serial number (the number under the part number) 37820-prb-a05 2068-510737 - KManager version (not 'the latest') 4.4.3.0 - th...
- Sat Apr 14, 2018 8:35 pm
- Forum: K-Pro / KManager
- Topic: KPro / KManager requests
- Replies: 146
- Views: 832899
Re: KPro / KManager requests
I would like to request rev limit by gear. In addition, the addition of rev limit recovery similiar to flashpro would be nice as well.
- Tue Aug 22, 2017 9:07 am
- Forum: K-Pro / KManager
- Topic: S2000 kpro a26 Power steering
- Replies: 4
- Views: 4823
Re: S2000 kpro a26 Power steering
I will do that. Thank you
- Sat Aug 19, 2017 6:21 am
- Forum: K-Pro / KManager
- Topic: S2000 kpro a26 Power steering
- Replies: 4
- Views: 4823
Re: S2000 kpro a26 Power steering
Thank you. Ive been using a26 for a datalog switch for years. My steering rack has failed, and Im looking to change pins due to the failure. No other option on the manual datalog switch drop box will work for an S2000. PSP is needed for the electric rack SCS is needed for reading codes for SRS and E...
- Fri Aug 18, 2017 10:15 am
- Forum: K-Pro / KManager
- Topic: S2000 kpro a26 Power steering
- Replies: 4
- Views: 4823
S2000 kpro a26 Power steering
The electronic power steering module on 00-05 S2000s sends a signal to the engine ecu via A26.
Is this function supported with kpro?
Is this function supported with kpro?
- Tue Mar 14, 2017 8:50 pm
- Forum: K-Pro / KManager
- Topic: fluid pressure value for analog input sensor display is extremely inaccurate
- Replies: 4
- Views: 5922
Re: fluid pressure value for analog input sensor display is extremely inaccurate
Thank you, the sensors read out correctly now.
You should add that to the kpro help screen for analog pressure inputs
You should add that to the kpro help screen for analog pressure inputs
- Mon Mar 13, 2017 7:12 pm
- Forum: K-Pro / KManager
- Topic: fluid pressure value for analog input sensor display is extremely inaccurate
- Replies: 4
- Views: 5922
fluid pressure value for analog input sensor display is extremely inaccurate
- what vehicle you have 2001 S2000 - serial number of your K-Pro - version of software being used 4 - KManager version 4.3.2 - the calibration (as an attachment) - when and where you got the K-Pro Bought Kpro 4 new 2 months ago Gentlemen, I am having issues with the analog inputs for my oil and fuel...
- Mon Jan 30, 2017 12:47 pm
- Forum: K-Pro / KManager
- Topic: S2000 Kpro 5v source
- Replies: 20
- Views: 21048
Re: S2000 Kpro 5v source
Ok. Thank you for your help
- Mon Jan 30, 2017 11:24 am
- Forum: K-Pro / KManager
- Topic: S2000 Kpro 5v source
- Replies: 20
- Views: 21048
Re: S2000 Kpro 5v source
Ok. Can you please provide me with an acceptable way to ground the 5 v sensors?
Thank you.
Thank you.
- Sun Jan 29, 2017 9:43 pm
- Forum: K-Pro / KManager
- Topic: S2000 Kpro 5v source
- Replies: 20
- Views: 21048
Re: S2000 Kpro 5v source
I was able to find information from AEM for teh Series 2 stand alone directions. They list C28 as available for 5v power, and A31 as available for 5v ground.
Are these 2 pins acceptable for power and ground? I do not want to use power or ground connections that are already in use.
Are these 2 pins acceptable for power and ground? I do not want to use power or ground connections that are already in use.
- Sun Jan 29, 2017 9:25 pm
- Forum: K-Pro / KManager
- Topic: S2000 Kpro 5v source
- Replies: 20
- Views: 21048
Re: S2000 Kpro 5v source
Thank you for the prompt reply, even on a Sunday night! Much appreciated! I try to practice correct wiring, and I know you guys are picky with how a car is wired with Hondata, so I apologize if I am asking simple questions. Can run all 5 sensors without issue on the single 5v source from the ecu, or...
- Sun Jan 29, 2017 3:06 pm
- Forum: K-Pro / KManager
- Topic: S2000 Kpro 5v source
- Replies: 20
- Views: 21048
S2000 Kpro 5v source
Hello, I am adding an Ethanol content sensor, AEM Inline WB02, GaugeART CAN Gauge, and multiple AEM temperature and AEM pressure sensors to my S2000 Kpro 4. What are the recommended sources for 5v power and 5v ground on the S2000 ECU connections? The Kpro help page for analog inputs does not list a ...