Search found 110 matches
- Mon Nov 27, 2017 6:01 pm
- Forum: S300 Calibrations
- Topic: base map b18 turbo
- Replies: 7
- Views: 9225
Re: base map b18 turbo
It was some ebay 440s and he was on 14 psi on 91.
- Fri Jun 30, 2017 5:00 pm
- Forum: S300 Calibrations
- Topic: stock B20B 50 shot dry
- Replies: 1
- Views: 1489
Re: stock B20B 50 shot dry
Stock everything 91 octane 50 shot dry.
- Fri Jun 30, 2017 4:49 pm
- Forum: S300 Calibrations
- Topic: Need a basemap nothing I do seems to help
- Replies: 7
- Views: 3244
Re: Need a basemap nothing I do seems to help
Make sure your Map sensor is working. Turn key on click data log and it should read around 0. I see this all the time.
- Fri Jun 30, 2017 4:45 pm
- Forum: S300 Calibrations
- Topic: B18B Turbo basemap
- Replies: 2
- Views: 2486
Re: B18B Turbo basemap
This setup is using BBG but the injectors are Bosch 560cc and on E85 fuel.
- Fri Jun 30, 2017 4:42 pm
- Forum: K-Pro / KManager
- Topic: Version 4.3.3
- Replies: 1
- Views: 926
Version 4.3.3
Anyone else have issues with map sensor programming? If I run the stock map sensor and select stock map it is fine but if I try replacement map and select stock it is not right. I have a 4 bar and no matter what value I list it gives the same reading. Problem in the software?
- Thu Jun 08, 2017 12:34 pm
- Forum: FlashPro Calibrations
- Topic: 08 Mugen Civic Tune 218hp
- Replies: 6
- Views: 4257
Re: 06 Mugen Civic Tune 218hp
Made 214 at last dyno day with 49% humidity
- Wed May 10, 2017 9:33 am
- Forum: FlashPro Calibrations
- Topic: 08 Mugen Civic Tune 218hp
- Replies: 6
- Views: 4257
Re: 06 Mugen Civic Tune 218hp
K20z3 with Fajita F5 intake, Skunk 2 Alpha Header, and Vibrant street power exhaust.
- Wed May 10, 2017 8:51 am
- Forum: FlashPro Calibrations
- Topic: Knock sensor issue
- Replies: 3
- Views: 2237
Re: Knock sensor issue
I informed the person to go through the car for anything loose.
- Fri May 05, 2017 9:04 pm
- Forum: FlashPro Calibrations
- Topic: 08 Mugen Civic Tune 218hp
- Replies: 6
- Views: 4257
08 Mugen Civic Tune 218hp
Just a simple tune I did for a buddy.
- Fri May 05, 2017 8:52 pm
- Forum: FlashPro Calibrations
- Topic: Knock sensor issue
- Replies: 3
- Views: 2237
Knock sensor issue
Ive been tuning many cars now and I have this TSX that is giving me the business. It is seeing lots of knock in #3 and #1 cylinder along with a little bit in #2. Ive only tuned a handful of cars on Flashpro and the rest on the other systems. This car was a auto to manual swap and it is still on the ...
- Fri Mar 31, 2017 6:05 pm
- Forum: K-Pro Calibrations
- Topic: Tuning a JRSC K24a2 RSX
- Replies: 12
- Views: 5304
Re: Tuning a JRSC K24a2 RSX
Safe I would set it to around 21 like you have it. Make sure you give the motor some time between pulls those IAT numbers will get ugly.
- Mon Sep 14, 2015 2:32 am
- Forum: S300 Calibrations
- Topic: B16a p30 base map on smanager
- Replies: 2
- Views: 2287
Re: B16a p30 base map on smanager
If your in okc I can get you going with a tune. https://www.facebook.com/groups/RyansTuning/
- Mon Sep 14, 2015 2:20 am
- Forum: S300 Calibrations
- Topic: B16 turbo Vtec problems
- Replies: 12
- Views: 5267
Re: B16 turbo Vtec problems
stock injectors is your problem here is a b16 tune I made. Stock injectors max out in vtec at 3.8lbs at 5k rpm around that point.
- Mon Sep 14, 2015 2:12 am
- Forum: S300 Calibrations
- Topic: Mild Bulid GSR N/A Need a decent basemap
- Replies: 1
- Views: 1829
Re: Mild Bulid GSR N/A Need a decent basemap
Only map I have for a gsr not the best but a start.
- Mon Aug 03, 2015 3:17 am
- Forum: S300 Calibrations
- Topic: WHERE can I get a STOCK B16B MAP??
- Replies: 3
- Views: 3798
Re: WHERE can I get a STOCK B16B MAP??
here is one i made for a completely stock B16b