• Hondata Boost Control Solenoid

    Hondata Boost Control Solenoid

    • $100.00

    The Hondata 4 port boost controller precisely directs pressure to the top and bottom of your waste-gate diaphragm. It allows much lower waste-gate spring pressure for better low gear boost control and perfect high gear, high boost control.

    • A 10 lb waste-gate spring will enable 50+ psi of boost
    • Better spool-up and mid range power
    • Better duty cycle control

    For use with:

    • S300
    • K-Pro
    • FlashPro 2006-11 Civic Si
    • FlashPro S2000
    • FlashPro 07/08 TSX

    The Hondata 4 port boost control solenoid is designed for use in high boost applications, but also works well in low boost applications. It is normally closed so that on failure you will run off the waste-gate spring to prevent over-boosting.  It uses 1/8th NPT fittings which can be adapted to AN fittings.

    If you are upgrading from a 3 port solenoid, the boost control tables will need re-tuning.

    Sales Region Unrestricted
    Install Instructions

    Download PDF install instructions

    Related Products

    Hondata Boost Control Components

    Hondata Boost Control Components

    Components necessary for your OBDI ECU to run a boost control solenoid.  Kit includes Q20, Q28, D14, R70 & R71 components, instructions and ECU pins for both OBDI and OBDII ECUs.