The Hondata Strain Gauge (patent pending) is a gearshift mounted strain gauge sensor and remote strain gauge amplifier, which signals the ECU to cut the engine when the gear lever is moved.  This enables very quick no lift shifts with dog engagement transmissions.

The Strain Gauge works by using a strain elements in the gear shift knob to measure the force on the knob, via accurately measuring the strain on an aluminum insert between the gear lever and gear knob.

The aluminum insert has two bonded Omega┬« strain gauges which change electrical resistance very slightly when force is applied to the shift knob.  Due to magic the very slight difference in resistance gets converted by the Strain Amplifier to a voltage which can be used by the ECU to determine when you are applying force to the gear knob to start to shift gears.

The Strain Amplifier also has a off/on output so that the ECU does not need to compare the voltage with pre-set parameters in order to determine if a gear shift is taking place.  The Strain Amplifier has two adjustment screws, one for forward force and one for rearward force, so that the shift force can be adjusted quickly with reprogramming the ECU.

  • Adjustable cut threshold for both forward and backward gear lever movement.
  • Simple 'no laptop' field adjustment with a screwdriver.
  • Analog (voltage) output proportional to gear level force.
  • Trigger output for ECU engine cut.
  • Precision internal amplifier for accurate force determination.
  • High quality Omega┬« linear strain gauges.
  • Temperature compensation for consistent operation.
  • Made in USA

Can I use with with synchromesh transmissions?

Not recommended.

Strain Gauge

  • Brand: Hondata, Inc.
  • Product Code: strain
  • Availability: In Stock
  • $595.00


Related Products

S300

S300

s300/s300j Overview The s300 version 3 is a plug in module to the OBD1 factory Honda Engine C..

$495.00

KPro

KPro

The K-Series Programmable ECU (K-Pro) consists of a hardware modification to any K-Series ECU, plus ..

$695.00

KPro 05-06 RSX

KPro 05-06 RSX

This is a Hondata modified 2002-2004 RSX ECU and an adapter harness for the 05-06 RSX Hondata mak..

$845.00

Strain Gauge Shift Knob Adapter

Strain Gauge Shift Knob Adapter

Adapts the strain gauge (M10-1.5 female threads) to work with a shift lever using 7/16-20 male threa..

$25.00