|
There are red and green LEDs next to the USB connector on the top of the programmer board. To view the programmer status LEDs remove the ECU case.
Green LED
|
Red LED
|
Meaning
|
On
|
Off
|
Normal operation when not connected to KManager.
|
On
|
Flashing
|
KManager communicating with the ECU normally.
|
On
|
Flashing/Solid
|
KManager programming the ECU or datalogging.
|
Flashing
|
On
|
Fault with programmer board - see Updating KPro firmware
|
Off
|
Off
|
If the ignition is on then there is a fault with the programmer board or ECU socketing.
|
|