Knock Sensor Parameters

Top  Previous  Next

Knock sensor parameters.

 

parameters-knock

 

Always enable the knock sensor.

 

Flashing the MIL (check engine light) when the ECU detects knock will help alert you if the engine is knocking.

 

knock-settings

Use stock knock control logic - enables the stock knock control tables (knock ignition limit and knock retard tables).  Note that in versions of the software before 1.4.2 these tables were disabled by default.  If these tables are enabled, it is probable the ECU will  retard the ignition and some re-tuning will be required.

 

For more information see Knock Control