Uploading a Calibration

Top  Previous  Next

Uploading a calibration is the process where a calibration is transferred to the ECU.

 

Uploading from a PC to the ECU

1.Load your calibration into FlashProManager.
2.Plug the FlashPro into the PC using USB.
3.Plug the FlashPro into the diagnostic connector and switch on the vehicle ignition.
4.Select Upload from the Online menu.

 

upload-calibration

 

Uploading from the FlashPro to the ECU

To upload a calibration which has been previously stored on the FlashPro:

1.Plug the FlashPro into the diagnostic connector and switch on the vehicle ignition.
Primary calibration - press the Program button for at least one second.
Secondary calibration - holding the Datalog button down, press the Program button for at least one second, releasing the Program button before the Datalog button.

 

Storing a calibration on the FlashPro

It is possible to upload a calibration to the FlashPro, which can then later be uploaded to the ECU. You can have two calibrations on the FlashPro - termed primary and secondary calibrations.

1.Load your calibration into FlashProManager.
2.Plug the FlashPro in the PC using USB.
3.Open the FlashPro window, select the Calibrations tab, and select Upload.

 

upload-primary

Notes

Before a calibration is uploaded to the FlashPro:

You must lock your FlashPro to your vehicle.
You must register your FlashPro with Hondata.