| View previous topic :: View next topic |
| Author |
Message |
perico_asesino78
Joined: 06 Jan 2009
Posts: 27
Location: Ecuador
|
 Posted: Wed Jun 02, 2010 4:45 pm Post subject: Problems with ligths on |
 |
|
Hi, I have problems with idle if I put the lights ON the wideband read LEAN and the car dont have a smooth idle.... I think that the dead time is the problem, but the precision turbo injectors had a specific dead time but if you use a resistor box... is the same dead time or not?
thanks |
|
| Back to top |
|
 |
Spunkster
Site Admin
Joined: 20 Sep 2002
Posts: 7887
Location: Hondata
|
| Posted: Wed Jun 02, 2010 4:47 pm Post subject: |
|
|
| You must use a resistor box or you will damage the ECU. You may not have the correct dead times for those injectors. |
|
| Back to top |
|
|
perico_asesino78
Joined: 06 Jan 2009
Posts: 27
Location: Ecuador
|
| Posted: Wed Jun 02, 2010 4:59 pm Post subject: |
|
|
| Spunkster wrote: |
| You must use a resistor box or you will damage the ECU. You may not have the correct dead times for those injectors. |
Thanks! I have a resistor box for a prelude 90's buy I don't know what dead time to use... |
|
| Back to top |
|
|
perico_asesino78
Joined: 06 Jan 2009
Posts: 27
Location: Ecuador
|
| Posted: Wed Jun 02, 2010 9:31 pm Post subject: |
|
|
| the resistor box was installed with the s300 and the precision turbo injectors |
|
| Back to top |
|
|
|
FAQ
Search
Usergroups
Register
Profile
Log in to check your private messages
Log in
