boost not stable, bouncing at high rpm
boost not stable, bouncing at high rpm
hi i am having problems with my boost not stable bouncing from 11 to 12, i have set my 4th gear @ 13psi and quick spool 2 psi lower than that.Help please..
- Attachments
-
- street 4.s3d
- (76.13 KiB) Downloaded 43 times
Re: boost not stable, bouncing at high rpm
do i have to set quickspool to my commanded boost? because iam noticing that if the boost hits the quickspool it returned to 48% pwm from 100% and comes back if its below quickspool
Re: boost not stable, bouncing at high rpm
You have not posted the calibration the datalog was made with.