91 crx si b18c1 loss of throttle

Post your non-Hondata questions / problems here.
Post Reply
dallask45
Posts: 3
Joined: Thu Sep 08, 2022 7:24 pm

91 crx si b18c1 loss of throttle

Post by dallask45 »

hello all, I have a built b18c1. The car ran great after being tuned but the alternator over charged the battery and fried my hondata s300. I installed a new s300 and uploaded my tune. the car starts and idles fine, but I lose throttle when doing hard pulls but only once the car warms up, I can let off the throttle and step back into it, but it will fall flat on its face again shorty after and I'll have to repeat the cycle. I hope I explained this well enough if not please ask questions and I will try to explain the best I can. Any help is gretaly appreciated, thank you.
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 91 crx si b18c1 loss of throttle

Post by Spunkster »

Post the calibration and a datalog showing the issue.
dallask45
Posts: 3
Joined: Thu Sep 08, 2022 7:24 pm

Re: 91 crx si b18c1 loss of throttle

Post by dallask45 »

What would you like me to have displayed in the data log? Im currently needing to pin my electric boost controler into my ecu. Do you happen to know what size they are? ive ordered multiple sets with different sizes and they are never small enough to fit into A11.
dallask45
Posts: 3
Joined: Thu Sep 08, 2022 7:24 pm

Re: 91 crx si b18c1 loss of throttle

Post by dallask45 »

i attached the current calibration that my tuner installed while at his shop
You do not have the required permissions to view the files attached to this post.
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 91 crx si b18c1 loss of throttle

Post by Spunkster »

The datalog needs to show the issue you are describing.

You need the small OBD1 pins.
Post Reply