s300 euro-p30

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Overlord69
Posts: 3
Joined: Thu Aug 25, 2022 3:29 pm

s300 euro-p30

Post by Overlord69 »

i installed my s300 into my p30 (civic eg6 b16a2) i have a euro ecu so it looked diffrent from the us and jdm ones
at first it worked all fine but now the engine check light is always on and the rpm is not going over 4000
im new here and im little bit confused to the forum and i coudnt fine anything
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: s300 euro-p30

Post by Spunkster »

post a picture of the inside of the ECU
Overlord69
Posts: 3
Joined: Thu Aug 25, 2022 3:29 pm

Re: s300 euro-p30

Post by Overlord69 »

not rn but i have the code on the side of the ecu: 37820-P30-G01 775-302847 AXP

i also tried to check engine error codes but the check engine light is just on and nothing happens

ty for the fast reply ^^
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: s300 euro-p30

Post by Spunkster »

Spunkster wrote: Thu Aug 25, 2022 3:45 pm post a picture of the inside of the ECU
Overlord69
Posts: 3
Joined: Thu Aug 25, 2022 3:29 pm

Re: s300 euro-p30

Post by Overlord69 »

here took a while sry._.
Attachments
with s300
with s300
IMG_4076.jpg (2.85 MiB) Viewed 1101 times
without s300
without s300
IMG_4077.jpg (3.01 MiB) Viewed 1101 times
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: s300 euro-p30

Post by Spunkster »

IS J12 cut in the ECU?
Post Reply