So I just got my Hondata and it is the first mod I have done. I don't have any bolt-ons or anything. The only thing I have is a K&N Oil filter in the stock air box, and I plan to put on a 3.5" intake soon. '
Here were the averages between 3 runs from 2k to 6k rpm in 2nd gear (stock, filter swap, filter swap w Hondata):
Stock: 3.60s
Filter Swap: 3.37s
Hondata w Filter: 3.43s
In the low end (2k-4k) it was slower and seemed bogged down, in the upper end (4k-6k) it pulled slightly better but barely.
Can someone here point me in the right direction on how to adjust air-fuel ratios, or help with a tune? I'd like to be able to drive this around and figure it out some until I put the new intake on and have to retune the car.
Thanks!
2012 Civic Si Tuning Help
2012+ US/Canadian Civic Si / 2013+ ILX
Return to “Civic Si 2012-2015 US/Canadian / 2013+ ILX”
Jump to
- General
- ↳ Hondata News
- ↳ Applications
- ↳ Non-Hondata
- s100/s200/s300
- ↳ s300 / SManager
- ↳ S300 Calibrations
- ↳ SManager Display Templates
- ↳ s100/s200
- ↳ Romeditor 4 Software
- ↳ HondaLogger Software
- ↳ Coil Pack Retrofit
- K-Series
- ↳ K-Pro / KManager
- ↳ K-Pro Calibrations
- ↳ KManager Display Templates
- ↳ K-Series Reflash
- FlashPro
- ↳ FlashPro Manager
- ↳ FlashPro Calibrations
- ↳ Accord 2008+ FlashPro
- ↳ Civic Si 2006-2011 Americas
- ↳ Civic Si 2012-2015 US/Canadian / 2013+ ILX
- ↳ Civic Type R 2006-2010 Japanese FD2
- ↳ Civic Type R 2007-2011 European FN2
- ↳ Civic Type R 2015+
- ↳ Civic 2016+ 1.5 Turbo Americas/Asia
- ↳ CRV 2017+
- ↳ CR-Z 2010-2012 US/Europe/Asia
- ↳ Fit 2007-2008
- ↳ RDX 2007-2012
- ↳ S2000 2006-2009 Americas/Europe/Asia
- ↳ TL 2007-2008
- ↳ TSX 2004-2014
- Traction Control
- ↳ General / Traction Control Manager Software
- ↳ Traction Control with S300
- ↳ Traction Control with KPro
- ↳ Traction Control with FlashPro
- Bluetooth Mobile Apps
- ↳ Hondata Mobile