Rev Limiter activating between 3500-4000 rpm

s300 and SManager software questions & answers
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Rev Limiter activating between 3500-4000 rpm

Post by Spunkster »

I would recommend that you replace the capacitors in the ECU: https://www.hondata.com/products/access ... acitor-kit
irontable1_
Posts: 12
Joined: Sun Jun 05, 2022 5:14 pm
Contact:

Re: Rev Limiter activating between 3500-4000 rpm

Post by irontable1_ »

I’ve got another P28 with new capacitors on order. I’ll replace the ones in the Ecu I have now. Hope it works. I appreciate your help on this one. I’ve been losing sleep. Thank you very much!!

Did the plugs I showed you check out or should I change to the ones that are on the hondata website?
P.S This is not a CPR setup. Stock distributor if that matters.
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Rev Limiter activating between 3500-4000 rpm

Post by Spunkster »

That part number should be ok for plugs as they are resistor type.
Post Reply