Flashpro stopped responding while programming, car doesn't start

FlashPro Manager software
Post Reply
Ninty
Posts: 2
Joined: Wed Jun 08, 2022 8:54 am

Flashpro stopped responding while programming, car doesn't start

Post by Ninty »

The first time I tried to program the tune, the program light came on, but then the power light turned off and turned back on after a few seconds, then the program and power light turned off.
After all that the program failed and the car will no longer start (unprogrammed ecu?)
When plugging the Flashpro back into my computer, it showed that there was an error due to the ECU no longer responding while flashing, and it said to check the obdii pins. The pins look fine, so now I'm just worried the flashpro isn't working properly?
I submitted this as feedback to Flashpro but if anyone could tell me what else I can do please let me know, thanks.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Flashpro stopped responding while programming, car doesn't start

Post by Spunkster »

Unplug the FlashPro form the vehicle and unplug the USB from the laptop and then plug everything back in and try again.
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Flashpro stopped responding while programming, car doesn't start

Post by Hondata »

What is the serial number? We get a lot of unsolicited feedback sent and need the serial number to match it with a customer.
Hondata
Ninty
Posts: 2
Joined: Wed Jun 08, 2022 8:54 am

Re: Flashpro stopped responding while programming, car doesn't start

Post by Ninty »

Hi Thank you for the replies.
I believe my car battery was just low because after retrying with a laptop connected it worked.
Post Reply