Need a base map for a jrsc k20/k24

K-Series Programmable ECU Calibration updates / downloads
mrhype1
Posts: 8
Joined: Sat Apr 02, 2022 6:19 pm

Need a base map for a jrsc k20/k24

Post by mrhype1 »

Any help is appreciated Thanks In Advance,...I just got my motor built. It's a 2006 rsx-s k20z1 head on a k24a Tsx block along with a Jackson Racing Supercharger on 11psi of boost.
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: Need a base map for a jrsc k20/k24

Post by CalibratEd »

I can help out. Can you provide datalogs with wideband data? What is your plan for the car? Do you plan to get it dyno tuned or e tuned?

-Ed
DRamos28
Posts: 1
Joined: Tue May 03, 2022 8:33 pm

Re: Need a base map for a jrsc k20/k24

Post by DRamos28 »

im also doing a K24/K20 and need help with a base map tune can anyone help me out i have K24a4 block with a K20a2 head rbc cams prb intake manifold 70mm throttle body hybrid racing fuel rail and 1000cc injectors can't get car to start only cranks i disabled the immobilizer on my rsx but still nothing no check engine light comes on door nor the green key light plzz help
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: Need a base map for a jrsc k20/k24

Post by CalibratEd »

DRamos28 wrote: Tue May 03, 2022 8:40 pm im also doing a K24/K20 and need help with a base map tune can anyone help me out i have K24a4 block with a K20a2 head rbc cams prb intake manifold 70mm throttle body hybrid racing fuel rail and 1000cc injectors can't get car to start only cranks i disabled the immobilizer on my rsx but still nothing no check engine light comes on door nor the green key light plzz help
Sure start your own thread. If you have double checked your electrical system, check the basics. Make sure you have spark, compression and fuel.

-Ed
mrhype1
Posts: 8
Joined: Sat Apr 02, 2022 6:19 pm

Re: Need a base map for a jrsc k20/k24

Post by mrhype1 »

CalibratEd wrote: Mon Apr 04, 2022 3:23 pm I can help out. Can you provide datalogs with wideband data? What is your plan for the car? Do you plan to get it dyno tuned or e tuned?

-Ed
Sorry for the late delay. finally gotten a chance to do the datalogs. Any help is appreciated.
Attachments
superchargeridle.kdl
(172.29 KiB) Downloaded 56 times
supercharger.kdl
(420.85 KiB) Downloaded 68 times
mrhype1
Posts: 8
Joined: Sat Apr 02, 2022 6:19 pm

Re: Need a base map for a jrsc k20/k24

Post by mrhype1 »

here is the kal im using for my setup so far. I know it needs a few adjustments, because my mechanic told me my car was running very lean. Thanks for the help.
Attachments
k24 SuperCharged Frankenstein 2020.kal
(164 KiB) Downloaded 63 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: Need a base map for a jrsc k20/k24

Post by CalibratEd »

Yes, the car is running lean. I recommend to use a wideband when you are force inducted. I also don't recommend using random files you find online.

What map sensor and injectors are you running? Do you need a full tune or something that is drivable?

-Ed
mrhype1
Posts: 8
Joined: Sat Apr 02, 2022 6:19 pm

Re: Need a base map for a jrsc k20/k24

Post by mrhype1 »

im using Hondata Kpro v2 Bluetooth. my map sensor is a hondata 4 bar. my injectors are injector dynamics 725cc. i need a tune good enough to get me to a dyno to get a full tune. unless you can help me with a full tune. Thank You
mrhype1
Posts: 8
Joined: Sat Apr 02, 2022 6:19 pm

Re: Need a base map for a jrsc k20/k24

Post by mrhype1 »

CalibratEd wrote: Wed Feb 08, 2023 8:25 pm Yes, the car is running lean. I recommend to use a wideband when you are force inducted. I also don't recommend using random files you find online.

What map sensor and injectors are you running? Do you need a full tune or something that is drivable?

-Ed
im using Hondata Kpro v2 Bluetooth. my map sensor is a hondata 4 bar. my injectors are injector dynamics 725cc. i need a tune good enough to get me to a dyno to get a full tune. unless you can help me with a full tune. Thank You
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: Need a base map for a jrsc k20/k24

Post by CalibratEd »

mrhype1 wrote: Thu Feb 16, 2023 8:17 pm
CalibratEd wrote: Wed Feb 08, 2023 8:25 pm Yes, the car is running lean. I recommend to use a wideband when you are force inducted. I also don't recommend using random files you find online.

What map sensor and injectors are you running? Do you need a full tune or something that is drivable?

-Ed
im using Hondata Kpro v2 Bluetooth. my map sensor is a hondata 4 bar. my injectors are injector dynamics 725cc. i need a tune good enough to get me to a dyno to get a full tune. unless you can help me with a full tune. Thank You
Do you have a wideband installed? I can help you with a tune to get you to a tuner or provide you an Etuning service. It is up to you.

-Ed
mrhype1
Posts: 8
Joined: Sat Apr 02, 2022 6:19 pm

Re: Need a base map for a jrsc k20/k24

Post by mrhype1 »

CalibratEd wrote: Tue Feb 21, 2023 6:47 am
mrhype1 wrote: Thu Feb 16, 2023 8:17 pm
CalibratEd wrote: Wed Feb 08, 2023 8:25 pm Yes, the car is running lean. I recommend to use a wideband when you are force inducted. I also don't recommend using random files you find online.

What map sensor and injectors are you running? Do you need a full tune or something that is drivable?

-Ed
im using Hondata Kpro v2 Bluetooth. my map sensor is a hondata 4 bar. my injectors are injector dynamics 725cc. i need a tune good enough to get me to a dyno to get a full tune. unless you can help me with a full tune. Thank You
Do you have a wideband installed? I can help you with a tune to get you to a tuner or provide you an Etuning service. It is up to you.

-Ed
I'm a running a oem Denso o2 sensor from a 02-04 rsx type-s as a wideband. I would like to get a full e-tune from you. What you charging and what payment do you prefer. Thanks
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: Need a base map for a jrsc k20/k24

Post by CalibratEd »

I pm’d you the details I use PayPal. Do you plan to get an aftermarket wideband?

-Ed
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: Need a base map for a jrsc k20/k24

Post by CalibratEd »

Here is the base file. See if the car starts and idles. If so create a datalog of the car at idle and let it reach operating temperature. If possible create a normal driving log.

-Ed
Attachments
mrhype1_base.kal
(163.43 KiB) Downloaded 63 times
mrhype1
Posts: 8
Joined: Sat Apr 02, 2022 6:19 pm

Re: Need a base map for a jrsc k20/k24

Post by mrhype1 »

CalibratEd wrote: Thu Feb 23, 2023 9:43 pm Here is the base file. See if the car starts and idles. If so create a datalog of the car at idle and let it reach operating temperature. If possible create a normal driving log.

-Ed
here are the datalogs you asked for. didn't get a chance to do the driving log. weather isn't permitting at the moment
Attachments
2023idle1.kdl
(1.84 MiB) Downloaded 53 times
2023idle.kdl
(1.84 MiB) Downloaded 57 times
mrhype1
Posts: 8
Joined: Sat Apr 02, 2022 6:19 pm

Re: Need a base map for a jrsc k20/k24

Post by mrhype1 »

Hey Ed! Thanks bro for the help! I finally gotten a chance to get my car tuned on a dyno here locally. 👍👍
Post Reply