Green key light in civic SI 2006-2011 ecu (after swap)

Questions / support for the K-Series ECU re-flash
Post Reply
MarcinPL
Posts: 2
Joined: Mon Mar 28, 2022 12:37 am

Green key light in civic SI 2006-2011 ecu (after swap)

Post by MarcinPL »

Hi, I have problem with green key light on my dash and cannot turn on my engine.
Short info: It is in Honda civic 2006-2011 fd1 (originally was R18a2 engine) after swap to K24A3 (with civic Si 2006-2011 engine harness and ecu). So my question is: Is it possible somehow to disable immo on my ecu? how I can do that? maybe by hybrid racing immo bypass: https://www.hybrid-racing.com/products/ ... elete-chip? or maybe is there an easy way in Flashpro (I have it but haven`t switched it to ecu yet). My local honda dealer will not be able to help probably as I`m in PL and ECU is from USA.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Green key light in civic SI 2006-2011 ecu (after swap)

Post by Spunkster »

No, you cannot disable the immobilizer in the FlashPro. You will have to get the immobilizer working as it is supposed to and matched to the ECU and keys.
MarcinPL
Posts: 2
Joined: Mon Mar 28, 2022 12:37 am

Re: Green key light in civic SI 2006-2011 ecu (after swap)

Post by MarcinPL »

Thanks for reply, and do you know maybe if it will work with this Civic Si ECU and engine harness? I think that an sensor is blocking start
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Green key light in civic SI 2006-2011 ecu (after swap)

Post by Spunkster »

I'm sorry, but this is not something we can assist with.
Post Reply