Stock Tuned map - knock in cyl 3

FlashPro questions & answers specific to the 2006-2009 (US, UK, Asia) S2000
Post Reply
mm64
Posts: 6
Joined: Mon Feb 25, 2019 11:41 pm

Stock Tuned map - knock in cyl 3

Post by mm64 »

Completely stock engine with a recent valve adjustment. Running 92 octane. Gutted airbox and an engine torque damper are the only mods. I put the stock "tuned" map on it and got a couple of knocks on cyl 3 in my first test run & datalog. The car was warm.

This is my first time tuning, I plan to run the stock "tuned" map until I decide on custom tuner. Are these knocks cause for concern? If not, how many knocks in 20 min are cause for concern?

There's a lot online about a phantom knock on cyl 2, but not cyl 3 and I have no perspective on if these 2 knocks are even noteworthy.
Attachments
datalog0000 hondata tuned.fpdl
(4.45 MiB) Downloaded 273 times
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Stock Tuned map - knock in cyl 3

Post by Hondata »

2 knock counts in 25 minutes is not a problem.

Remove 2 degrees timing and see if the knock count changes. If not, then it is some other engine noise that the knock sensor is reading.
Hondata
Post Reply