rich afr with toda calibration
rich afr with toda calibration
Hi everyone, I have a 2006 Honda s2000 with fujita CAI,Toda header and invidia q300 exhaust,i uploaded the toda calibration and did a datalog and as far I know for a NA engine an afr of 10.1-10.4,is very rich or is this normal with this canned Toda calibration... can some one please verify the datalog and point me in the right direction, thanks in advance.
- Attachments
-
- datalog0001 toda calibration rich afr.fpdl
- (2.16 MiB) Downloaded 203 times
Re: rich afr with toda calibration
It is a bit rich for a naturally aspirated setup. You can try taking some fuel out, but your best bet would be to get this tuned on the dyno.
Re: rich afr with toda calibration
Will do in about a month, thanks.
Re: rich afr with toda calibration
One more question, if I go to settings, then overlay lambda input...closed loop and open loop what settings I use, stock sensor or corrected stock sensor?
Re: rich afr with toda calibration
use the stock sensor.
Re: rich afr with toda calibration
Thanks again!