Strat up problems with S300 after converting from S200.
-
- Posts: 8
- Joined: Fri Sep 02, 2005 1:30 pm
Strat up problems with S300 after converting from S200.
I upgraded to the S300 from my previous S200. After loading the maps and the Smanager making the conversions I uploaded them to my ecu and started the car. It idles perfect but after 8-10 seconds it dies. This happens everytime I start the car. I cannot seem to figure out why that this is happening. It ran fine on the S200. I am using a GM 3bar but that didn't give me any issues with the S200 either. Anyone have any idea what i happening?
-Ryan
-Ryan
-
- Posts: 8
- Joined: Fri Sep 02, 2005 1:30 pm
-
- Posts: 8
- Joined: Fri Sep 02, 2005 1:30 pm
-
- Posts: 25
- Joined: Wed Sep 11, 2002 2:29 pm
- Location: www.kohlerperformance.com
- Contact:
which colomns of the map did you load? 1st 20 or last 20?
also adjust, the cranking fuel trim, and "post start fuel adjustment"
what i noticed was, when i converted my s200 map into s300.. none of the post start fuel adjustments, cranking trim, and thorrtle tip, settings adjusted over..
i bet your problem is the "post start fuel adjustment"
also adjust, the cranking fuel trim, and "post start fuel adjustment"
what i noticed was, when i converted my s200 map into s300.. none of the post start fuel adjustments, cranking trim, and thorrtle tip, settings adjusted over..
i bet your problem is the "post start fuel adjustment"
s300
When I first start the car it idles different and then after about 10 sec's I see changes in the way it runs.
I did play with the post start fuel adjustment and it helped a bit. I put that number to 0.
I am running 1600cc injectors so I figured that what was giving me the problem.
I'm interested in this topic as well.
I did play with the post start fuel adjustment and it helped a bit. I put that number to 0.
I am running 1600cc injectors so I figured that what was giving me the problem.
I'm interested in this topic as well.
-
- Posts: 8
- Joined: Fri Sep 02, 2005 1:30 pm
-
- Posts: 8
- Joined: Fri Sep 02, 2005 1:30 pm
How can I post it here when it is not hosted anywhere? Please excuse my ignorance. I will try this to see if it works.
- Attachments
-
- RyanParrot_PumpGas.bin
- (32 KiB) Downloaded 151 times
-
- Posts: 8
- Joined: Fri Sep 02, 2005 1:30 pm
-
- Posts: 8
- Joined: Fri Sep 02, 2005 1:30 pm
I am using the newest version of the software available. I don't really know what I am doing when it comes to tuning or adjusting the map to fix problems. The S200 bin worked perfectly but I decided to upgrade to the S300 for street tuning. Is there anyway you could convert it and take a look at any settings that miht cause my problems? It runs fine on the maos Hondata provided with the system. Thanks for all your help so far.
-Ryan
-Ryan