K24 into a VW Baja

Questions / support for the K-Series ECU re-flash
Post Reply
SoCalBaja
Posts: 4
Joined: Wed Jun 27, 2018 10:14 pm

K24 into a VW Baja

Post by SoCalBaja » Wed Jun 27, 2018 10:21 pm

I just picked up a K24A RBB-2. The JDM shop gave me a ECU. It’s number 37820-PND-J01. Can that be reflashed to work with a kpro system on this engine? I plan on using a RSX Type S engine harness and Rywire power harness. Does all this sound right for a stand alone system in a VW Baja Bug?

User avatar
Spunkster
Site Admin
Posts: 18026
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: K24 into a VW Baja

Post by Spunkster » Thu Jun 28, 2018 12:02 pm

Unfortunately that ECU is not compatible with K-Pro. What transmission are you using with this?

SoCalBaja
Posts: 4
Joined: Wed Jun 27, 2018 10:14 pm

Re: K24 into a VW Baja

Post by SoCalBaja » Thu Jun 28, 2018 11:05 pm

I called HASPORT.COM today and they said it would work. What ecu do I need then?
I have a K24 RBB-2, RSX-S wiring harness.

I’m using the VW tranny. I’m putting the K24 in my 1970 VW Baja Bug.

SoCalBaja
Posts: 4
Joined: Wed Jun 27, 2018 10:14 pm

Re: K24 into a VW Baja

Post by SoCalBaja » Fri Jun 29, 2018 6:20 am

Spunkster wrote:
Thu Jun 28, 2018 12:02 pm
Unfortunately that ECU is not compatible with K-Pro. What transmission are you using with this?
It says PND ecu.
Attachments
0D7146F4-E236-4395-963F-1507A3AADB56.png
0D7146F4-E236-4395-963F-1507A3AADB56.png (404.28 KiB) Viewed 1772 times

SoCalBaja
Posts: 4
Joined: Wed Jun 27, 2018 10:14 pm

Re: K24 into a VW Baja

Post by SoCalBaja » Fri Jun 29, 2018 6:35 am

Will this one work?
Attachments
E1564582-42F6-4D04-9F08-A67B11CB9C3B.png
E1564582-42F6-4D04-9F08-A67B11CB9C3B.png (1.95 MiB) Viewed 1771 times

User avatar
Spunkster
Site Admin
Posts: 18026
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: K24 into a VW Baja

Post by Spunkster » Fri Jun 29, 2018 9:56 am

The Japanese PND will not work. The US PND will work (A08).

Post Reply